Image similar, may contain optional accessories
KL9184 | Potential distribution terminal, 8 x 24 V DC, 8 x 0 V DC
Power contact
+24 V DC
+24 V DC
Power contact
0 V
0 V
+24 V DC
+24 V DC
+24 V DC
+24 V DC
+24 V DC
+24 V DC
+24 V DC
+24 V DC
0 V
0 V
0 V
0 V
0 V
0 V
0 V
0 V
KL9184 | Potential distribution terminal, 8 x 24 V DC, 8 x 0 V DC
The KL9184 potential distribution terminal provides the potential of the 24 V DC contact at 8 terminal points and the potential of the 0 V contact at 8 terminal points. The conductors can be connected without tools in the case of solid wires using a direct plug-in technique.
The HD Bus Terminals (High Density) with increased packing density feature 16 connection points in the housing of a 12 mm terminal block.
Product status:
regular delivery
Product information
| Technical data | KL9184 |
|---|---|
| Current load | ≤ 10 A |
| Integrated fine-wire fuse | – |
| Power LED | – |
| Defect LED | – |
| Diagnostics | – |
| Current consumption K-bus | – |
| Nominal voltage | ≤ 60 V DC |
| Electrical isolation | yes |
| Reported to K-bus | – |
| Shield connection | – |
| Renewed infeed | – |
| Number of outputs | e.g.: 8 x 24 V contact, 8 x 0 V contact |
| Connection facility to additional power contact | 8 |
| K-bus, looped through | yes |
| Bit width in the process image | 0 |
| Electrical connection to DIN rail | – |
| Housing width | 12 mm |
| Special features | 8 x 24 V and 8 x 0 V connection |
| Weight | approx. 60 g |
| Side by side mounting on Bus Terminals with power contact | yes, left without PE |
| Side by side mounting on Bus Terminals without power contact | no |
| Operating temperature | -25…+60°C |
| Storage temperature | -40…+85°C |
| Approvals/markings | CE, CCC, UL, ATEX, IECEx, DNV |
| Ex marking | ATEX: II 3 G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc |
| Housing data | HD housing |
|---|---|
| Design form | HD (High Density) housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | – |
| Wiring | solid conductors (s): direct plug-in technique; fine-stranded conductors (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Stripping length | 8…9 mm |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
© Beckhoff Automation 2025 - Terms of Use