Image similar, may contain optional accessories
KL9184 | Potential distribution terminal, 8 x 24 V DC, 8 x 0 V DC
Power contact
+24 V DC
+24 V DC
Power contact
0 V
0 V
+24 V DC
+24 V DC
+24 V DC
+24 V DC
+24 V DC
+24 V DC
+24 V DC
+24 V DC
0 V
0 V
0 V
0 V
0 V
0 V
0 V
0 V
KL9184 | Potential distribution terminal, 8 x 24 V DC, 8 x 0 V DC
The KL9184 potential distribution terminal provides the potential of the 24 V DC contact at eight terminal points and the potential of the 0 V contact at eight terminal points. The conductors can be connected without tools in the case of solid wires using a direct plug-in technology.
The HD Bus Terminals (High Density) with increased packing density feature 16 connection points in the housing of a 12 mm terminal block.
Product status:
regular delivery
Product information
| Technical data | KL9184 |
|---|---|
| Current load | ≤ 10 A |
| Integrated fine-wire fuse | – |
| Power LED | – |
| Defect LED | – |
| Diagnostics | – |
| Current consumption K-bus | – |
| Nominal voltage | ≤ 60 V DC |
| Electrical isolation | yes |
| Reported to K-bus | – |
| Shield connection | – |
| Renewed infeed | – |
| Number of outputs | e.g.: 8 x 24 V contact, 8 x 0 V contact |
| Connection facility to additional power contact | 8 |
| K-bus, looped through | yes |
| Bit width in the process image | 0 |
| Electrical connection to DIN rail | – |
| Housing width | 12 mm |
| Special features | 8 x 24 V and 8 x 0 V connection |
| Weight | approx. 60 g |
| Side by side mounting on Bus Terminals with power contact | yes, left without PE |
| Side by side mounting on Bus Terminals without power contact | – |
| Operating temperature | -25…+60°C |
| Storage temperature | -40…+85°C |
| Approvals/markings | CE, CCC, UL, ATEX, IECEx, DNV, cFMus |
| Ex marking | ATEX: II 3G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc |
| Housing data | HD housing |
|---|---|
| Design form | HD (High Density) housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | – |
| Wiring | solid conductors (s): direct plug-in technology; fine-stranded conductors (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Stripping length | 8…9 mm |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
| Material compliance | KL9184 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant without exemption |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
© Beckhoff Automation 2026 - Terms of Use