EP2624-0002 | EtherCAT Box, 4-channel relay output, 25 V AC, 30 V DC, 0.5 A AC, 2 A DC, M12
EtherCAT signal input
EtherCAT signal output
M12 I/O connection sockets
Signal status display
Labeling areas
Power supply status display:
Box supply (US)
Auxiliary voltage (UP)
Power supply feed
Power supply downstream
connection
connection
1 | Tx+
2 | Rx+
3 | Rx-
4 | Tx-
2 | Rx+
3 | Rx-
4 | Tx-
1 | +24V DC UP
2 | 13
3 | GND
4 | 14
5 | n. c.
2 | 13
3 | GND
4 | 14
5 | n. c.
1 | +24 V DC US
2 | +24 V DC UP
3 | GNDS
4 | GNDP
2 | +24 V DC UP
3 | GNDS
4 | GNDP
Top view
I/O connection
Connector assignment
EP2624-0002 | EtherCAT Box, 4-channel relay output, 25 V AC, 30 V DC, 0.5 A AC, 2 A DC, M12
The EP2624-0002 EtherCAT Box has four relays, each with one contact, which can be controlled potential-free by the PLC via EtherCAT. The relay contacts can each be used up to 25 V AC or 30 V DC. The signal status of the individual channels is indicated by LEDs.
The signals are connected via M12 screw type connectors. The power supply is passed through.
Product status:
regular delivery
Product information
| Technical data | EP2624-0002 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, 4-pin, a-coded, shielded |
| Number of outputs | 4 x make contacts |
| Ohmic switching current | 0.5 A AC/2 A DC per channel |
| Output connections | M12 x 1, 5-pin, a-coded |
| Minimum permitted load | 10 µA at 10 mV DC |
| Load type | ohmic, inductive, lamp load |
| Nominal output voltage | 25 V AC/30 V DC |
| Distributed clocks | – |
| Current consumption from US | 200 mA |
| Power supply connection | feed: 1 x M8 male socket, 4-pin, a-coded; downstream connection: 1 x M8 female socket, 4-pin, a-coded |
| Operating cycles mech. (min.) | 1 x 108 |
| Operating cycles electr. (min.) | 2 x 105 (1 A/30 V DC) |
| Electrical isolation | 500 V |
| Special features | potential-free switching |
| Weight | approx. 165 g |
| Operating/storage temperature | -25…+60°C/-40…+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings | CE, UL, ATEX |
| Ex marking | II 3 G Ex nA IIC T4 Gc |
| Housing data | 8 x M8, 4 x M12 |
|---|---|
| Dimensions (W x H x D) | 30 mm x 126 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use