解除修正閉じる

EPP1321-0060 | EtherCAT P Box, 1-port EtherCAT-to-EtherCAT P feed-in

EPP1321-0060 | EtherCAT P Box, 1-port EtherCAT-to-EtherCAT P feed-in

EPP1321-0060 | EtherCAT P Box, 1-port EtherCAT-to-EtherCAT P feed-in

EtherCAT signal input
EtherCAT P signal output
Power supply status display:
Box supply (US)
Auxiliary voltage (UP)
Power supply feed
Power supply downstream
connection
1 | Tx+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
1 | Tx+
2 | Rx+
3 | Rx-
4 | Tx-
1 | +24 V DC US
2 | +24 V DC UP
3 | GNDS
4 | GNDP
EPP1321-0060 | EtherCAT P Box, 1-port EtherCAT-to-EtherCAT P feed-in

EPP1321-0060 | EtherCAT P Box, 1-port EtherCAT-to-EtherCAT P feed-in

EtherCAT P: The one cable solution – One step closer to automation without control cabinets

EtherCAT P: The one cable solution – One step closer to automation without control cabinets

The 1-channel EtherCAT to EtherCAT P supply module in IP67 enables the flexible conversion from EtherCAT to EtherCAT P. The current carrying capacity of 3 A per US and UP of the EtherCAT P segment enables the use of a large number of sensors and actuators. For larger or more branched machines or systems a power supply boost may be required. The EPP1332-0001 EtherCAT P junction with voltage refresh feature can be used for feeding in US or UP at any desired point.

For topological branches without the need for voltage refreshment, the use of the EPP1342-0001 is recommended. All infrastructure box modules feature status LEDs for indicating EtherCAT, US and UP.

The US and UP voltages are supplied via a 4-pin M8 plug connector and can optionally be forwarded.

Product status:

regular delivery

Product information

Technical dataEPP1321-0060
ProtocolEtherCAT/EtherCAT P
Bus interface1 x M8 socket, shielded, 1 x M8 socket, P-coded, shielded
Task within EtherCAT systemconverter from EtherCAT to EtherCAT P
Number of channelsIN: 1 x EtherCAT, OUT: 1 x EtherCAT P
Nominal voltage24 V DC (-15%/+20%)
Total currentmax. 3 A per US and UP for all EtherCAT P ports in total
Current consumption from UStyp. 100 mA
Power supply connectionfeed: 1 x M8 male socket, 4-pin, a-coded; downstream connection: 1 x M8 female socket, 4-pin, a-coded
Distributed clocks
Distance between stations100 m (100BASE-TX)
Data transfer rates100 Mbit/s
Weightapprox. 90 g
Operating/storage temperature-25…+60°C/-40…+85°C
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.IP65/66/67 (conforms to EN 60529)/variable
Approvals/markingsCE
Housing dataEPPxxxx-006x
Dimensions (W x H x D)30 mm x 86 mm x 22 mm
MaterialPA6 (polyamide)
Installation2 fixing holes 3.5 mm diameter for M3

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use