ZK4800-8002-xxxx | Motor connection cable 1 mm² with itec® plug system, fixed installation
Contact assembly
ZK4800-8002-xxxx | Motor connection cable 1 mm² with itec® plug system, fixed installation
Contact assembly
cables for fixed installation,
min. bending radius = 50 mm (5 x OD),
(4 x 1.0 mm² + (2 x 0.5 mm²) + (2 x AWG26)), max. cable length (in total) 25 m, vertical 5 m,
The cable is UL and CSA listed.
suitable for:
- AM801x
- AM802x
- AM803x
- AM853x
- AX8000 up to 12 A
Attention: Not suitable for operation with TwinSAFE SBC/SBT. For TwinSAFE functions SBC/SBT, the cable ZK4800-8022-0xxx must be used.
Product status:
regular delivery
Product information
| Technical data | Head A |
|---|---|
| Installation size | itec® (Series 915) |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | Power: 3+PE, Signal: 5 |
| Mating cycles | 500 |
| Wire termination | crimp connection |
| Technical data | Head B |
|---|---|
| Installation size | Pitch dimension 7.62 mm |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 4-pin |
| Mating cycles | 25 |
| Wire termination | Push-in |
| Max. wire cross-section | AWG24…AWG8 (0.5 mm²…10 mm²) |
| Technical data | Cable by meter |
|---|---|
| Operating voltage | max. 1000 V AC (UL) |
| Cross-section (power) | 1.00 mm² (approx. AWG18) |
| Cross-section (signal) | AWG26 (approx. 0.14 mm²) |
| Use | fixed installation |
| Material jacket | PVC (polyvinyl chloride) |
| Outer cable diameter | 10.0 mm ± 0.3 mm (0.3937" ± 0.0118") |
| Min. bending radius, fixed installation | 4 x outer cable diameter |
| Jacket color | orange |
For further technical details, please refer to the data sheet.
| A1 | 44.00 mm |
| A2 | 19.00 mm |
| B1 | approx. 60.00 mm |
| B2 | approx. 47.00 mm |
| Ordering information | Length |
|---|---|
| ZK4800-8002-0008 | 0.80 m |
| ZK4800-8002-0010 | 1.00 m |
| ZK4800-8002-0012 | 1.20 m |
| ZK4800-8002-0020 | 2.00 m |
| ZK4800-8002-0024 | 2.40 m |
| ZK4800-8002-0026 | 2.60 m |
| ZK4800-8002-0028 | 2.80 m |
| ZK4800-8002-0030 | 3.00 m |
| ZK4800-8002-0032 | 3.20 m |
| ZK4800-8002-0034 | 3.40 m |
| ZK4800-8002-0036 | 3.60 m |
| ZK4800-8002-0038 | 3.80 m |
| ZK4800-8002-0040 | 4.00 m |
| ZK4800-8002-0042 | 4.20 m |
| ZK4800-8002-0044 | 4.40 m |
| ZK4800-8002-0050 | 5.00 m |
| ZK4800-8002-0060 | 6.00 m |
| ZK4800-8002-0070 | 7.00 m |
| ZK4800-8002-0080 | 8.00 m |
| ZK4800-8002-0090 | 9.00 m |
| ZK4800-8002-0100 | 10.00 m |
| ZK4800-8002-0110 | 11.00 m |
| ZK4800-8002-0120 | 12.00 m |
| ZK4800-8002-0150 | 15.00 m |
| ZK4800-8002-0160 | 16.00 m |
| ZK4800-8002-0180 | 18.00 m |
| ZK4800-8002-0190 | 19.00 m |
| ZK4800-8002-0200 | 20.00 m |
| ZK4800-8002-0210 | 21.00 m |
| ZK4800-8002-0240 | 24.00 m |
| ZK4800-8002-0250 | 25.00 m |
| sold by the meter, admissible total cable length see documentation of Servo Drive |
Loading content ...
| Material compliance | ZK4800-8002-xxxx |
|---|---|
| CAS No. | no |
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant without exemption |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
© Beckhoff Automation 2026 - Terms of Use