EP6601-0002 | EtherCAT Box, 1-port communication interface, Ethernet switch port
connection
2 | Rx+
3 | Rx-
4 | Tx-
2 | +24 V DC UP
3 | GNDS
4 | GNDP
EP6601-0002 | EtherCAT Box, 1-port communication interface, Ethernet switch port
The EP6601-0002 Ethernet switch port module is used for the decentralized connection of Ethernet devices to the EtherCAT Box network. The EtherCAT system relays the Ethernet communication of the connected devices fully transparent and collision-free.
The switch port module can be installed at any location within the EtherCAT strand. No configuration is required.
Further benefits underline the particular suitability for the application in industrial environments:
- compact design in IP67 housing
- 10/100 Mbit/s, half or full duplex, automatic detection of data transmission speed
- support for network variables
Product status:
regular delivery
Product information
| Technical data | EP6601-0002 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, shielded, screw type |
| Bus system | all Ethernet (IEEE 802.3)-based protocols, store and forward switching mode |
| Ethernet interface | 10BASE-T/100BASE-TX Ethernet, M12, D-coded, 4-pin |
| Data transfer rates | 10/100 Mbit/s, IEEE 802.3u auto-negotiation, half or full duplex at 10 and 100 Mbit/s possible, automatic settings |
| Cable length | up to 100 m twisted pair |
| Hardware diagnostics | status LEDs |
| Nominal voltage | 24 V (-15 %/+20 %) |
| Distributed clocks | – |
| Current consumption from US | typ. 120 mA |
| Power supply connection | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin |
| Electrical isolation | 500 V |
| Weight | approx. 165 g |
| Configuration | no |
| Special features | support of RT Ethernet, publisher/subscriber, DHCP/BootP server |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings | CE, UL |
| Housing data | 8 x M8, 4 x M12 |
|---|---|
| Dimensions (W x H x D) | 30 mm x 126 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
Loading content ...
Loading content ...
© Beckhoff Automation 2023 - Terms of Use