EP6228-3032 | EtherCAT Box, 8-channel communication interface, IO-Link, master, Class B, M12
2 | Rx+
3 | Rx-
4 | Tx-
2 | P24
3 | L-
4 | C/Q
5 | N24
2 | GNDS
3 | FE
4 | +24 V DC US
5 | +24 V DC UP
EP6228-3032 | EtherCAT Box, 8-channel communication interface, IO-Link, master, Class B, M12
From the IO-Link sensor into the cloud
The EP6228-3032 IO-Link module enables the connection of up to eight IO-Link devices according to specification V1.1 Class B. These can be IO-Link Box modules, actuators, sensors or a combination of both. A point-to-point connection is used between the module and the device. The EtherCAT Box is parameterized via the EtherCAT master. IO-Link is designed as an intelligent link between the fieldbus level and connected sensors, enabling the bidirectional exchange of parameterization data via the IO-Link connection. The IO-Link device can be parameterized with service data from TwinCAT via ADS and also very conveniently using the integrated IO-Link configuration tool.
In the standard setting, the eight IO-Link channels of the EP6228-3032 operate as an 8-channel input module, 24 V DC, which communicates with connected IO-Link devices as required, parameterizes them and, if necessary, changes their operating mode. Each IO-Link port can optionally be used as a pure input or output.
The 7/8" power supply connectors offer an increased total current of the EtherCAT Box so that all IO-Link ports can be operated with maximum current.
Product status:
regular delivery
Product information
| Technical data | EP6228-3032 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, 4-pin, a-coded, shielded |
| Data transfer rates | 4.8 kbaud, 38.4 kbaud and 230.4 kbaud |
| Specification version | IO-Link V1.1, Class B |
| IO-Link interfaces | 8 |
| Connection method | M12 socket, 5-pin, a-coded |
| Nominal voltage | 24 V DC (-15%/+20%) |
| IO-Link sensor supply L+ | 24 V DC, 1.4 A per port, ∑ 11.2 A |
| IO-Link extra power P24 | 24 V DC, max. 4.0 A per port, ∑ 4.0 A for 2 ports each |
| Current consumption from US | typ. 130 mA + load |
| Electrical isolation | 500 V |
| Power supply connection | feed: 1 x 7/8" plug, 5-pin; downstream connection: 1 x 7/8" socket, 5-pin |
| Distributed clocks | – |
| Special features | – |
| Weight | approx. 440 g |
| Operating/storage temperature | -25…+60°C/-40…+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings | CE, (UL in preparation) |
| Housing data | 7/8" infeed |
|---|---|
| Dimensions (W x H x D) | 60 mm x 150 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3; 2 fixing holes 4.5 mm diameter for M4 |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use