EP3754-0002 | EtherCAT Box, 1-channel analog output, multi-function, M12
connection
2 | Rx+
3 | Rx-
4 | Tx-
2 | Input +
3 | GNDP
4 | Input -
5 | Shield
2 | +24 V DC UP
3 | GNDS
4 | GNDP
EP3754-0002 | EtherCAT Box, 1-channel analog output, multi-function, M12
New multifunctional EtherCAT box: Combined functions in a sleek package
The EP3754-0002 EtherCAT Box has four analog multifunctional inputs, which can be extensively parameterized on an individual basis:
- voltage measurement: ±5 mV to ±30 V (including ±10 V), 0…10 V, 0…5 V
- current measurement: ±20 mA, 4…20 mA, 0…20 mA
- resistance measurement: 0…5 kΩ
- electrical resistance R in 2-/3-/4-wire connection
- RTD measurement in 2-/3-/4-wire connection
- potentiometer: min. 1 kΩ
The measured values are digitalized with a resolution of 16 bits and transmitted to the higher-level automation device under electrical isolation. The four input channels are electrically isolated from each other. The input filters and their associated conversion times are configurable in a wide range. The inputs can, if required, be scaled differently, and automatic limit value monitoring is also available. EtherCAT is used for parameterization purposes. The parameters are stored in the module.
Product status:
product announcement | estimated market release 4th quarter 2024
Product information
| Technical data | EP3754-0002 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, 4-pin, a-coded, shielded |
| Number of inputs | 4 |
| Input connections | M12 socket, 5-pin, A-coded, differential current/voltage measurement, 2-, 3- and 4-wire connection technology for RTD and resistance, 2-wire connection technology for thermocouple |
| Conversion time | ~ 100 µs |
| Resolution | 16 bit (incl. sign) |
| Sensor types | analog sensors, thermocouple: type B, C, E, J, K, L, N, R, S, T, U, mV measurement, temperature: Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000, resistance measurement (z. B. potentiometer, 10 Ω…1,2/4 kΩ) |
| Signal type | -10/0...+10 V | -20mA/0/4...20 mA, RTD/PT100/PT1000, ±30/±60/±75 mV (thermocouple), parameterizable per channel |
| Common-mode voltage UCM | max. 35 V |
| Internal resistance | > 200 kΩ | typ. 85 Ω + diode voltage |
| Measurement error/uncertainty | < ±0.3% (relative to full scale value) |
| Input filter limit frequency | 5 kHz |
| Nominal voltage | 24 V DC (-15%/+20%) |
| Distributed clocks | yes |
| Input filter | configurable |
| Sensor supply | from load supply voltage UP |
| Current consumption from US | 120 mA |
| Power supply connection | feed: 1 x M8 male socket, 4-pin, a-coded; downstream connection: 1 x M8 female socket, 4-pin, a-coded |
| Electrical isolation | 500 V |
| Special features | multi-function, parameterizable |
| Operating/storage temperature | -25…+60°C/-40…+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings | CE, UL |
| Housing data | 8 x M8, 4 x M12 |
|---|---|
| Dimensions (W x H x D) | 30 mm x 126 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use