KL1704 | Bus Terminal, 4-channel digital input, 120…230 V AC, 10 ms
120 V/230 V
0 V
KL1704 | Bus Terminal, 4-channel digital input, 120…230 V AC, 10 ms
Economy series: AX1000 economy servo drive and AF1000 economy variable frequency drive
The KL1704 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. The direct connection of 120 V/230 V AC signals is possible. The Bus Terminal contains four channels that indicate its signal state by means of light emitting diodes.
Special features:
- direct connection of 120 V/230 V AC signals
- for AC voltage
Product status:
regular delivery
Product information
| Technical data | KL1704 |
|---|---|
| Connection technology | 2-wire |
| Number of inputs | 4 |
| Nominal voltage | 120/230 V AC |
| Signal voltage “0” | 0…40 V |
| Signal voltage “1” | 79…260 V |
| Input filter | typ. 10 ms |
| Input current | typ. 4.6 mA at 230 V, typ. 2.3 mA at 120 V |
| Current consumption K-bus | typ. 3 mA |
| Switching times | 10 ms |
| Electrical isolation | 500 V (K-bus/mains voltage); 3750 V AC, 1 min. |
| Bit width in the process image | 4 inputs |
| Configuration | no address or configuration setting |
| Special features | resistive/capacitive input behavior |
| Weight | approx. 60 g |
| Storage temperature | -25…+85°C |
| Operating temperature | 0…55°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL |
| Housing data | KL-12-8pin |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxxx series |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
| Material compliance | KL1704 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use