MO2316-0000-1112 | 16-channel digital combi, 24 V DC/0.5 A, M12

MO2316-0000-1112 | 16-channel digital combi, 24 V DC/0.5 A, M12

MO2316-0000-1112 | 16-channel digital combi, 24 V DC/0.5 A, M12

MO2316-0000-1112 | 16-channel digital combi, 24 V DC/0.5 A, M12

MO2316-0000-1112 | 16-channel digital combi, 24 V DC/0.5 A, M12

The MX-System series | # 6: The I/O modules

The MX-System series | # 6: The I/O modules

The I/O modules in the MX-System offer a wide choice for all signal types and directions. With 16 digital channels, each of which can be operated as inputs or outputs, the MO2316-0000-1112 can be used universally to operate a wide variety of inputs and outputs in any combination. Configuration is not required; the input circuit is internally permanently connected to the output driver so that a set output is automatically displayed in the input process image.

 

Each output can handle an output current up to a maximum of 0.5 A and is limited to a total of 4 A. The inputs record binary control signals from the process level and transfer them, with electrical isolation, to the controller. The signal state is shown on the display; the signal interface is established via screw-type M12 connectors.

 

Various diagnostic options are also available for each channel. The short-circuit proof 24 V DC sensor/actuator supply for the M12 connectors has electronic protection.

Product status:

regular delivery

Product information

Technical dataMO2316-0000-1112
Product categoryI/O modules
Category/versionDigital combination
Connection technologyM12 connector
Channels16
Output voltage/current24 V DC/0.5 A
Housing dataR1S1T1
Baseplate interfacedata connector
Number of data slots1
Operating temperature0…50°C
Storage temperature-25…+60°C
Protection ratingIP65/67
Approvals/markingsCE, UL (in preparation)

Loading content ...

Material complianceMO2316-0000-1112
CAS No.7439-92-1
REACH SVHCLead
REACH Annex XVIIcompliant
REACH Annex XIVcompliant
SCIP No.SCIP submission in progress
POPcompliant
RoHScompliant with exemption
RoHS exemption6c: Copper alloy with a mass fraction of up to 4% lead, 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors
CA Prop65www.beckhoff.com/prop65
DisclaimerThis statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply.

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2026 - Terms of Use