SoltarFixarFechar

KL9060 | Adapter terminal for KL8001 power terminals

KL9060 | Adapter terminal for KL8001 power terminals

KL9060 | Adapter terminal for KL8001 power terminals

Signal output terminal bus
+24 V
0 V
PE
Top view 
KL9060 | Adapter terminal for KL8001 power terminals

KL9060 | Adapter terminal for KL8001 power terminals

The KL9060 adapter terminal is attached to the end of the Bus Terminal block in the same way as the standard terminal KL9010. The block is terminated with the KL9060 and provides the opportunity to connect one or more power terminals of the KL8001 series. In the KL9060 the K-bus signals are fed into a ribbon cable together with the 24 V DC for the power contacts.

Power for the electronics of the KL9060 and also for the internal electronics of the subsequent KL8001 power terminals is provided via the K-bus. The power contacts and the associated connection points are electrically isolated and fed to the output stages of the power terminal. This connection is short-circuit proof and capable of bearing up to 1 A. Supply voltage feeding from one power module to the next can be achieved without any additional wiring. The KL9060 forms a properly working unit together with at least one KL8001. No further parameterizing or configuration work on the KL9060 is necessary apart from plugging-in the K-bus extension cable. All diagnostic and commissioning tasks relate directly to the power terminal.

Product status:

service phase | Possibly with other technical features or equipment in case of a service order or repair

Product information

Technical dataKL9060
Number of power terminalsup to 10 KL8001
Current load≤ 10 A
Power LED
Defect LED
Type of connection1 x 10-pin ribbon cable connector
Distance between stations
Starting current
Current consumption K-bus
Current supply K-bus
Power contacts24 V DC (-15 %/+20 %)/max. 1.4 A, short-circuit proof
Nominal voltage24 V DC (-15 %/+20 %)
Electrical isolation500 V (power contact/supply voltage/K-bus)
Configuration possibilitynone, automatic
PE contactyes
Shield connection
Bit width in the process image
Electrical connection to DIN rail
Special featuresconnection to KL8001 via 20-pin flat ribbon plug
Weightapprox. 65 g
Operating/storage temperature0…+55 °C/-25…+85 °C
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.IP20/variable
Approvals/markingsCE

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use