KM4602 | Bus Terminal module, 2-channel analog output, voltage, 0…10 V, 12 bit, single-ended, manual/autom. operation
(output 1)
(output 2)
output voltage
manual operation (output 1)
output voltage
manual operation (output 2)
KM4602 | Bus Terminal module, 2-channel analog output, voltage, 0…10 V, 12 bit, single-ended, manual/autom. operation
The analog KM4602 output terminal has two potential-free analog 0 to 10 V outputs. Both are connected internally to common ground. For each channel a switch enables selection between automatic or manual mode. In automatic mode an analog value is issued depending on the process data. With the manual switch settings the value set via the potentiometer is applied to the output. For manual mode a 24 V supply is required for the Bus Coupler. The switch state can be read by the controller.
Product status:
regular delivery
Product information
| Technical data | KM4602 |
|---|---|
| Technology | single-ended |
| Number of outputs | 2 |
| Power supply | via the K-bus |
| Signal voltage | 0…10 V |
| Load | > 5 kΩ (short-circuit proof) |
| Output error | < ±0.1% (relative to end value) |
| Resolution | 12 bit |
| Conversion time | ~ 1.5 ms |
| Electrical isolation | 500 V (K-bus/signal voltage) |
| Current consumption power contacts | – (no power contacts) |
| Current consumption K-bus | typ. 175 mA |
| Configuration | no address or configuration setting |
| Special features | manual/automatic operation |
| Weight | approx. 85 g |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE |
| Housing data | KL-24 |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | – |
| Wiring | specific push-in connection |
| Dimensions (W x H x D) | 24 mm x 100 mm x 52 mm |
| Material compliance | KM4602 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
© Beckhoff Automation 2026 - Terms of Use