DetachFixClose

EJ1254 | EtherCAT plug-in module, 4-channel digital input, 24 V DC, 1 µs, timestamp

EJ1254 | EtherCAT plug-in module, 4-channel digital input, 24 V DC, 1 µs, timestamp

EJ1254 | EtherCAT plug-in module, 4-channel digital input, 24 V DC, 1 µs, timestamp

EJ1254 | EtherCAT plug-in module, 4-channel digital input, 24 V DC, 1 µs, timestamp

EJ1254 | EtherCAT plug-in module, 4-channel digital input, 24 V DC, 1 µs, timestamp

EJ1254 | EtherCAT plug-in module, 4-channel digital input, 24 V DC, 1 µs, timestamp

EJ1254 | EtherCAT plug-in module, 4-channel digital input, 24 V DC, 1 µs, timestamp

EJ1254 | EtherCAT plug-in module, 4-channel digital input, 24 V DC, 1 µs, timestamp

EJ1254 | EtherCAT plug-in module, 4-channel digital input, 24 V DC, 1 µs, timestamp

EtherCAT plug-in modules of the EJ series

EtherCAT plug-in modules of the EJ series

The EJ1254 EtherCAT plug-in module acquires the fast binary 24 V control signals from the process level and transmits them, in an electrically isolated form, to the controller. The module has four channels that indicate their signal state via light emitting diodes. The signals are furnished with a time stamp that identifies the time of the last edge change with a resolution of 1 ns. With this XFC technology, signal characteristics can be traced exactly in time and correlated with the distributed clocks system-wide. With this technology, machine-wide parallel hardware wiring of digital inputs or encoder signals for synchronization purposes is often no longer required.

 

Special features:

  • suitable for particularly fast signals due to very low input delay
  • synchronized operation through distributed clocks XFC technology possible
  • support of XFC technology timestamp

Product status:

regular delivery

Product information

Technical dataEJ1254
Specificationsimilar to EN 61131-2, type 3, “0”: -3…5 V DC, “1”: 11…30 V DC, typ. 3 mA input current
Connection technology4-wire
Number of inputs4
Nominal voltage24 V DC (-15%/+20%)
“0” signal voltage-3…+5 V (similar to EN 61131-2, type 3)
“1” signal voltage11…30 V (similar to EN 61131-2, type 3)
Input currenttyp. 3 mA (similar to EN 61131-2, type 3)
Input filtertyp. < 1 µs
Resolution timestamp1 ns
Precision of timestamp in the terminal10 ns (+ input delay)
Distributed clock precision<< 1 µs
Input delay TON/TOFF< 1 µs
Distributed clocksyes
Time resolution signal1 ns
Auxiliary power currenttyp. 10 mA + load
Current consumption E-bustyp. 135 mA
Electrical isolation500 V (E-bus/field potential)
Special featurestimestamping, latch last edge
Weightapprox. 30 g
Operating/storage temperature0…+55°C/-25…+85°C
Relative humidity95%, no condensation
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
Protect. rating/installation pos.IP20/see documentation
Approvals/markingsCE
Housing dataEJ-12-16pin
Design formEtherCAT I/O plug-in module
Materialpolycarbonate
Installationon signal distribution board
Mechanical codingEJ plug-in module: signal-specific coding pins on the housing,
signal distribution board: holes in the printed circuit board
Lockinglatching lug in circuit board cut-out
Connection methodfield wiring: application-specific wiring level on the signal distribution board,
EJ plug-in module: 2 x 20-pin socket strip
Dimensions (W x H x D)12 mm x 66 mm x 55 mm

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use