Sede centrale Svizzera
Beckhoff Automation AG

Rheinweg 7
8200 Schaffhausen, Svizzera

+41 52 633 40 40

Supporto tecnico Schaffhausen (German)

+41 52 633 40 40
Modulo di contatto

Supporto tecnico Arbon (German)

+41 71 447 10 80

Supporto tecnico Lyssach (German)

+41 34 447 44 88

Supporto tecnico Yverdon-les-Bains (French)

+41 24 447 27 00

Supporto tecnico Losone (Italian)

+41 91 792 24 40

EJ2xxx | EtherCAT plug-in modules, digital output

The EtherCAT plug-in modules of the EJ2xxx series are intended for processing digital/binary signals. Unless otherwise stated, the high level corresponds to the supply voltage in the positive switching logic, the low level corresponds to ground. With the ground-switching logic, it is reversed. Different supply voltages are available for both types of logic.

In terms of technology, the EJxxxx EtherCAT plug-in modules are usually based on the ELxxxx EtherCAT Terminal with matching name. This allows initial tests to be carried out with EL terminals, while the corresponding EJ module on the signal distribution board is used in subsequent series production.


  • finely scalable channel density and functionality.
  • maximum packing density enables compact solutions.
  • For some terminals the XFC timestamp function enables µs-precise synchronization of the switching process with other processes.

Areas of application:

  • switching of standard actuators such as contactors and valves.
  • increase in machine efficiency/clock rate through XFC I/Os.

TwinSAFE, outputs
The EJ29xx EtherCAT plug-in module series provides fail-safe switching of actuators. The outputs are controlled by a TwinSAFE Logic-capable component via FSoE.

Your selection:
    Items per page
    Loading content ...