EL4112-0010 | EtherCAT Terminal, 2-channel analog output, current, ±10 mA, 16 bit
+24 V DC
0 V
EL4112-0010 | EtherCAT Terminal, 2-channel analog output, current, ±10 mA, 16 bit
Distributed Clocks: the integrated time management system in EtherCAT
The EL4112-0010 analog output terminal generates analog output signals in the range between -10 and +10 mA. The power is supplied to the process level with a resolution of 16 bits and is electrically isolated. Ground potential for the output channels of an EtherCAT Terminal is common with the 24 V DC supply. The output stages are powered by the 24 V supply. The signal state of the EtherCAT Terminals is indicated by light emitting diodes.
Product status:
regular delivery
Product information
| Technical data | EL4112-0010 |
|---|---|
| Number of outputs | 2 |
| Power supply | 24 V DC via power contacts |
| Signal current | -10…+10 mA |
| Distributed clocks | yes |
| Distributed clock precision | << 1 µs |
| Load | < 500 Ω (short-circuit proof) |
| Resolution | 16 bit (incl. sign) |
| Output error | < ±0.3% (relative to end value) |
| Electrical isolation | 500 V (E-bus/signal voltage) |
| Output rate | max. 15 ksps |
| Current consumption power contacts | typ. 15 mA + load |
| Current consumption E-bus | typ. 110 mA |
| Bit width in the process image | 2 x 16 bit AO output |
| Configuration | no address or configuration setting |
| Special features | Watchdog parameterizable, user synchronization can be activated. |
| Weight | approx. 65 g |
| Operating temperature | -25…+55°C |
| Storage temperature | -40…+85°C |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, CCC, UL, ATEX, IECEx |
| Ex marking | ATEX: II 3 G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc |
| Housing data | EL-12-8pin |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxxx series |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use