KL6224 | Bus Terminal, 4-channel communication interface, IO-Link, master
9, 11, 13, 15
+24 V DC
0 V
KL6224 | Bus Terminal, 4-channel communication interface, IO-Link, master
The KL6224 IO-Link master terminal enables connection of up to four IO-Link devices, e.g. actuators, sensors or combinations of both. A point-to-point connection is used between the terminal and the device. IO-Link is designed as an intelligent link between the fieldbus level and the sensor, wherein parameterization information can be exchanged bidirectionally via the IO-Link connection. The parameterization of the IO-Link devices with service data can be done from TwinCAT via register communication or very conveniently via the integrated IO-Link configuration tool.
In the default setting, the KL6224 functions as a 4-channel input terminal, 24 V DC, which communicates with connected IO-Link devices, parameterizes them and, if necessary, changes their operating mode.
Integration into the HD housing with 16 connection points enables each IO-Link device to be operated in 3-wire connection technology. The direct plug-in technology enables toolless construction.
Additional 24 V and 0 V connection points can be realized via the KL918x potential distributor terminal.
Product status:
regular delivery
Product information
| Technical data | KL6224 |
|---|---|
| Technology | IO-Link |
| Number of channels | 4 |
| IO-Link interfaces | 4 |
| Field voltage | 24 V DC via power contacts |
| Specification version | IO-Link V1.1 |
| Connection | 3-wire |
| Transmission rate | 4.8 kbaud, 38.4 kbaud and 230.4 kbaud |
| Cable length | max. 20 m |
| Power supply | via K-bus and power contacts |
| Supply current for devices | 500 mA per device |
| Current consumption K-bus | typ. 85 mA |
| Current consumption power contacts | no data |
| Electrical isolation | 500 V (K-bus/signal voltage) |
| Power contacts | yes |
| Nominal voltage | 24 V DC (-15%/+20%) |
| Weight | approx. 60 g |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL |
| Housing data | HD housing |
|---|---|
| Design form | HD (High Density) housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | – |
| Wiring | solid conductors (s): direct plug-in technology; fine-stranded conductors (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Stripping length | 8…9 mm |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
| Material compliance | KL6224 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use