KL2692 | Bus Terminal, 2-channel relay output, cycle monitoring, 30 V DC, 3 A
Watchdog enable
+24 V DC
0 V
watchdog enable
KL2692 | Bus Terminal, 2-channel relay output, cycle monitoring, 30 V DC, 3 A
The KL2692 Bus Terminal monitors a bit that is toggled by the controller during each cycle. If the toggle signal fails, the controller switches off two potential-free relay circuits in order to prevent damage to the machine. Failure of the toggle signal may be caused by the PLC cycle stopping, by a fault in the bus cable or connector, or by a fault in a bus device. The cycle monitoring time can be parameterized. The Bus Terminal has an enable input that enables the relay to be switched on if a correct toggle signal is detected.
Product status:
KL2692: regular delivery
KS2692: on request | Please contact sales.
Product information
| Technical data | KL2692 |
|---|---|
| Connection technology | 2-wire |
| Number of outputs | 2 potential-free relay outputs (normally-open contacts) |
| Number of inputs | 2 digital 24 V inputs |
| Nominal voltage | 30 V DC |
| Max. output current | 3 A per channel |
| Resistive switching current | 5 A AC/DC per channel |
| Inductive switching current | 2 A AC/DC per channel |
| Minimum permitted load | 10 mA at 5 V DC |
| Electrical isolation | 500 V (K-bus/field potential) |
| Current consumption power contacts | – |
| Current consumption K-bus | typ. 165 mA |
| Bit width in the process image | 2 x 8 bit data, 1 x 8 bit control/data |
| Operating cycles mech. (min.) | 2 x 107 |
| Operating cycles electr. (min.) | 1 x 105 (5 A/30 V DC) |
| Configuration | via the Bus Coupler or the controller |
| Weight | approx. 60 g |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring level | for all KSxxxx Bus Terminals |
| Approvals/markings | CE, UL |
| Housing data | KL-12-8pin | KS-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| KL2692 | Bus Terminal, 2-channel relay output, cycle monitoring, 30 V DC, 3 A |
| KS2692 | Bus Terminal, 2-channel relay output, cycle monitoring, 30 V DC, 3 A, pluggable wiring level |
Loading content ...
| Material compliance | KL2692 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use