EP6224-0092 | EtherCAT Box, 4-channel communication interface + 4-channel digital input, IO-Link, master, Class A, M12, TwinSAFE SC
connection
2 | Rx+
3 | Rx-
4 | Tx-
2 | Input
3 | L-
4 | C/Q
5 | n. c.
2 | +24 V DC UP
3 | GNDS
4 | GNDP
EP6224-0092 | EtherCAT Box, 4-channel communication interface + 4-channel digital input, IO-Link, master, Class A, M12, TwinSAFE SC
The EP6224-0092 IO-Link module enables up to four IO-Link devices to be connected. These can be actuators, sensors, or a combination of both. In addition, the EP6224-0092 offers four further digital inputs on the free pins of the M12 ports. The connection between the box and the device is thus point-to-point.
The EP6224-0092 also supports TwinSAFE SC (TwinSAFE Single Channel). The IO-Link data can thus be used for safety-related tasks via EtherCAT.
The EtherCAT Box is parameterized via the EtherCAT master. IO-Link is designed as an intelligent link between the fieldbus level and the sensor, wherein parameterization information can be exchanged bidirectionally via the IO-Link connection. The parameterization of the IO-Link devices with service data can be performed from TwinCAT via ADS or, even simpler, via the integrated IO-Link configuration tool. In the standard setting, the four IO-Link channels of the EP6224-0092 operate as a 4-channel input module, 24 V DC, which communicates with the connected IO-Link devices if necessary, parameterizes them and, if required, changes their operation mode. Each IO-Link port can also be used as a pure input or output. Its slimline design means that it can be used in tight spaces.
Product status:
regular delivery
Product information
| Technical data | EP6224-0092 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, 4-pin, a-coded, shielded |
| Specification version | IO-Link V1.1, Class A, Data transfer rates: 4.8 kbaud, 38.4 kbaud and 230.4 |
| IO-Link interfaces | 4 |
| Connection method | M12 socket, 5-pin, a-coded |
| Number of inputs | 4 digital inputs |
| Nominal input voltage | 24 V DC (-15%/+20%) |
| Input filter | 10 µs |
| “0” signal voltage | -3…+5 V |
| “1” signal voltage | 11…30 V, 6 mA input current (EN 61131-2, type 3) |
| Input current | typ. 3 mA (EN 61131-2, type 3) |
| Nominal voltage | 24 V DC (-15%/+20%) |
| IO-Link sensor supply L+ | 24 V DC, 1.4 A per port, ∑ 4 A |
| IO-Link extra power P24 | – |
| Current consumption from US | typ. 100 mA |
| Electrical isolation | 500 V |
| Power supply connection | feed: 1 x M8 male socket, 4-pin, a-coded; downstream connection: 1 x M8 female socket, 4-pin, a-coded |
| Distributed clocks | yes |
| Special features | TwinSAFE SC, each channel parameterizable in TwinCAT |
| Weight | approx. 165 g |
| Operating/storage temperature | -25…+60°C/-40…+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings | CE, UL |
| Housing data | 8 x M8, 4 x M12 |
|---|---|
| Dimensions (W x H x D) | 30 mm x 126 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use