The magnetic plate sets with the product designation AT9001 are part of the AT90xx mover. When using guide rails with movers from third-party suppliers or with self-designed movers, the magnetic plate set is available individually. The magnetic traveling fields of the XTS motor modules generate a linear movement with the aid of the magnetic plate sets. A set consists of two magnetic plates. One of the two magnetic plates is equipped with a sturdy encoder flag, which allows non-contact position detection of the movers.
With all variants, the "Mover Standard" and "Mover 1" magnetic plate sets are differentiated. "Mover 1" is always recognized as servo axis 1 and used as the first servo axis after starting. All subsequent movers (standard movers) are counted upwards. This results in a fixed assignment of the axis numbers to the movers, which is maintained even after the system has been switched off. The benefits for an application are as follows:
- When the system restarts, the parameters of the individual movers can be retained.
- The condition of a product on a mover can be clearly tracked.
- The system contains movers with various tools that can be reassigned after a system restart.
- The system does not have to be cleared after a fault, but can be driven to from the current mover position.
Product status:
regular delivery
| Product variants | Number of magnets | Nominal force | Peak force | Length | Mover | Possible curve segments |
|---|---|---|---|---|---|---|
| AT9001-x450-1440 | 4 | 25 N | 70 N | 46 mm | all | all |
| AT9001-x550-1440 | 5 | 30 N | 100 N | 50 mm | all | all |
| AT9001-x775-1440 | 7 | 45 N | 130 N | 75 mm | third party | all |
| AT9001-xAA0-1440 | 10 | 75 N | 210 N | 100 mm | third party | 22.5°, -22.5° and 45° |
Product information
| Technical data | AT9001-x550-1440 |
|---|---|
| Number of magnets | 5 |
| Nominal force | 30 N |
| Peak force | 100 N |
| Length | 50 mm |
| Possible curve segments | all |
Force specifications refer to straight sections
| Ordering information | |
|---|---|
| AT9001-0550-1440 | magnetic plate set mover standard, 5-pin, length 50 mm, pre-installed with 1.4 mm thick encoder flag, suitable for third-party movers |
| AT9001-1550-1440 | magnetic plate set mover 1, 5-pin, length 50 mm, pre-installed with 1.4 mm thick encoder flag, suitable for third-party movers |
| Material compliance | AT9001-x550-1440 |
|---|---|
| CAS No. | no |
| POP | compliant |
| RoHS | compliant without exemption |
| China-RoHS | www.beckhoff.com/china-rohs-motion |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use