EL6652 | EtherNet/IP scanner/adapter terminal
EL6652-0010 EtherNet/IP adapter terminal
The EL6652 EtherNet/IP-Master Terminal (scanner) has a switched 2-port Ethernet connection and can thus be operated in a line with further Ethernet/IP nodes. The process data are configured by an EtherCAT master, allowing different process data and different sizes. The EL6652 supports both multicast and unicast connections. Up to 16 simple EtherNet/IP-Slave devices can be connected via one generic node. The EL6652 is optionally also available as a slave version.
The EL6652-0010 is an EtherNet/IP slave terminal (adapter terminal) and enables connection to any EtherNet/IP master (scanner). Like the EL6652, it also has a switched 2-port Ethernet connection.
|Technology||EtherNet/IP scanner terminal||EtherNet/IP adapter terminal|
|Number of ports/channels||2 (switched)|
|Ethernet interface||100BASE-TX Ethernet with 2 x RJ45|
|Max. process data size||1 KByte input 1 kByte output data|
|Cable length||up to 100 m twisted pair|
|Hardware diagnosis||status LEDs|
|Power supply||via the E-bus|
|Electrical isolation||500 V (E-bus/Ethernet)|
|Configuration||via EtherCAT master|
|Current consumption E-bus||typ. 400 mA|
|Special features||multicast/unicast connection|
|Weight||approx. 75 g|
|Operating/storage temperature||0…+55 °C/-25…+85 °C|
|Relative humidity||95 %, no condensation|
|Vibration/shock resistance||conforms to EN 60068-2-6/EN 60068-2-27|
|EMC immunity/emission||conforms to EN 61000-6-2/EN 61000-6-4|
|Protect. class/installation pos.||IP 20/see documentation|
|Design form||compact terminal housing with signal LEDs|
|Dimensions (W x H x D)||24 mm x 100 mm x 52 mm|
|Installation||on 35 mm DIN rail, conforming to EN 60715 with lock|
|Side by side mounting by means of||double slot and key connection|
|Wiring||specific push-in connection|
|EL6652||EtherNet/IP scanner terminal, 2 x RJ45 switch|
|EL6652-0010||EtherNet/IP adapter terminal|
Loading content ...
Loading content ...