LossaFästStäng

EL9930 | PROFIsafe segment end terminal

EL9930 | PROFIsafe segment end terminal

EL9930 | PROFIsafe segment end terminal

EL9930 | PROFIsafe segment end terminal

EL9930 | PROFIsafe segment end terminal

The EL9930 standard EtherCAT Terminal supports the implementation of permitted PROFIsafe master and slave configurations together with TwinSAFE logic, e.g. with the EL6910 TwinSAFE logic terminal.

When scanning the I/O configuration, the EL9930 reports as two EtherCAT slaves (EL9930-0000 and EL9930-0001), so it is possible to set which PROFIsafe data should be observed for both data directions.

 

Product status:

regular delivery

Product information

Technical dataEL9930
TechnologyEtherCAT
Input voltage24 V DC (-15%/+20%)
Number of inputs0
Number of outputs0
Current consumption E-bus120 mA
Power loss1 W
Bit width in the process imagedynamic, according to the configuration in TwinCAT 3
Housing width12 mm
Side by side mounting on
EtherCAT Terminals with
power contact
yes
Side by side mounting on
EtherCAT Terminals without
power contact
yes
Weightapprox. 42 g
Operating/storage temperature-25…+55°C/-40…+70°C
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
Protect. rating/installation pos.IP20/see documentation
Approvals/markingsCE

Loading content ...

© Beckhoff Automation 2024 - Terms of Use