Image similar, may contain optional accessories
KL9180 | Potential distribution terminal, 2 x 24 V DC; 2 x 0 V DC, 2 x PE
Power contact
+24 V DC
+24 V DC
Power contact
0 V
0 V
Power contact
⏚
⏚
KL9180 | Potential distribution terminal, 2 x 24 V DC; 2 x 0 V DC, 2 x PE
The KL9180 Bus Terminal allows the supply voltage to be accessed a number of times via spring force terminals. The Bus Terminal makes it unnecessary to use additional terminal blocks on the terminal strip.
Product status:
regular delivery
Product information
| Technical data | KL9180 |
|---|---|
| Current load | ≤ 10 A |
| Integrated fine-wire fuse | – |
| Power LED | – |
| Defect LED | – |
| Diagnostics | – |
| Current consumption K-bus | – |
| Nominal voltage | arbitrary up to 230 V AC |
| Electrical isolation | – |
| Reported to K-bus | – |
| Shield connection | – |
| Renewed infeed | – |
| Connection facility to additional power contact | 2 |
| K-bus, looped through | yes |
| Bit width in the process image | 0 |
| Electrical connection to DIN rail | – |
| Housing width | 12 mm |
| Weight | approx. 50 g |
| Side by side mounting on Bus Terminals with power contact | yes |
| Side by side mounting on Bus Terminals without power contact | – |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Pluggable wiring level | for all KSxxxx Bus Terminals |
| Approvals/markings | CE, CCC, UL, ATEX, IECEx, DNV, cFMus |
| Ex marking | ATEX: II 3G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc |
| Housing data | KL-12-8pin | KS-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| KL9180 | Potential distribution terminal, 2 x 24 V DC; 2 x 0 V DC, 2 x PE |
| KS9180 | Potential distribution terminal, 2 x 24 V DC; 2 x 0 V DC, 2 x PE, pluggable wiring level |
Loading content ...
| Material compliance | KL9180 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant without exemption |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
© Beckhoff Automation 2026 - Terms of Use