PS3031-4810-0001 | Power supply PS3000; output: 48 V DC, 10 A; input: 3 AC 380…480 V, 3-phase
PS3031-4810-0001 | Power supply PS3000; output: 48 V DC, 10 A; input: 3 AC 380…480 V, 3-phase
Power supplies for 24 V and 48 V DC
The power supply PS3031-4810-0001 is a 3-phase, 48 V DC power supply with an output current of 10 A and an output power of 480 W. On the input side, the device has a wide range input, an active power factor correction (PFC) and an inrush current surge regulation.
The PS3031-4810-0001 has an extra power with a maximum output power of 150% for 4 seconds and can precisely trigger fuses with short-term peak current. The power supply belongs to the PS3000 family and has a width of 65 mm. A DC OK LED, an overload LED and a potential-free relay contact monitor the status of the output voltage.
Product status:
regular delivery
Product information
| Technical data | PS3031-4810-0001 |
|---|---|
| Input voltage | 3 AC 380…480 V |
| Wide-range input | yes |
| Input current | typ. 0.79 A at 400 V AC |
| Switch-on current limiter | yes |
| Mains frequency | 50…60 Hz |
| Starting current | typ. 3 A peak at 400 V AC |
| Harmonic correction (PFC) | active |
| Output voltage | 48 V DC |
| Adjustment range | 48…55 V DC |
| Output current | 10 A |
| Output | 480 W |
| Outpout power for 4 s | 720 W |
| Extra power | 50%/4 s |
| Precise fuse release | yes |
| DC OK LED | yes |
| Overload LED | yes |
| Efficiency | approx. 95.4% |
| Operating temperature | -25…+70°C |
| Shock resistance | conforms to EN 60068-2-27 |
| Vibration resistance | conforms to EN 60068-2-6 |
| Weight | approx. 870 g |
| Approvals/markings | CE, UL508 |
| Protection rating | IP20 |
| Housing data | Power supply |
|---|---|
| Dimensions (W x H x D) | 65 mm x 124 mm x 127 mm |
| Material | aluminum |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Wiring | spring-loaded technique |
| Connection cross-section | e*: 0.5…6 mm², f*: 0.5…4 mm², a*: 0.5…4 mm² |
| Connection cross-section AWG | AWG20-10 |
| Stripping length | 9…10 mm |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
| Material compliance | PS3031-4810-0001 |
|---|---|
| CAS No. | 1317-36-8 |
| REACH SVHC | Lead(II) oxide |
| REACH Annex XVII | compliant |
| REACH Annex XIV | compliant |
| SCIP No. | SCIP submission in progress |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use