The MO7342-0000-1112 enables direct operation of two 24 V DC motors. The speed or position is specified by the automation device via a 16 bit value. Connection of an incremental encoder enables a simple servo axis to be realized. The output stage is protected against overload and short-circuit, the common thermal overload warning applies to both output stages together. The module has two channels that indicate their signal state via light emitting diodes. The LEDs enable quick local diagnosis.
Product status:
product announcement
Product information
Technical data | MO7342-0000-1112 |
---|---|
Product category | I/O modules |
Category/version | compact drive technology |
Type | DC motor |
Feedback | incremental encoder |
Channels | 2 |
Connection method | M12 |
Output current | 3.5 A per channel |
Supply voltage from backplane | 24 V DC |
Encoder connection | 1 x A, B, C: 24 V DC, single-ended connection |
Encoder operating voltage | 24 V DC |
Limit frequency | 400,000 increments/s (with 4-fold evaluation), corresponding to 100 kHz |
DC link voltage | 24 V DC |
Baseplate interface | data connector |
Diagnostics | yes, status and live data via app |
Distributed clocks | yes |
Hot swap | yes |
TwinCAT version | TwinCAT 3 |
Weight | approx. 400 g |
Approvals/markings | CE, (UL in preparation) |
Housing data | R1S1T2 |
---|---|
Dimensions (W x H x D) | 30 mm × 110 mm × 72 mm |
Number of rows | 1 |
Number of slots | 1 |
Material | zinc and aluminum die-cast |
Cooling | convection |
Operating/storage temperature | 0…+50 °C/-25…+85 °C |
Protect. rating/installation pos. | IP65/67/variable |
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use