LossaFästStäng

ZK4500-8062-xxxx | Motor connection cable 1 mm² with itec® plug, torsionable

ZK4500-8062-xxxx | Motor connection cable 1 mm² with itec® plug, torsionable

ZK4500-8062-xxxx | Motor connection cable 1 mm² with itec® plug, torsionable

Contact assembly

Contact assembly

ZK4500-8062-xxxx | Motor connection cable 1 mm² with itec® plug, torsionable

ZK4500-8062-xxxx | Motor connection cable 1 mm² with itec® plug, torsionable

Contact assembly

Contact assembly

highly flexible, torsion-resistant cable with 2 mio. bending cycles, max. 240 m/min, max. 30 m/s²,

min. bending radius = 144 mm (12 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,

(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required

The cable is UL and CSA listed.

suitable for:

  • AM801x
  • AM802x
  • AM803x
  • AM853x
  • AL802x and AL804x (winding code A to H)
  • AX5000 (1,5…6 A)

Product status:

regular delivery

Product information

Technical dataHead A
Installation sizeitec® (Series 915)
Connector typeplug
Contact typefemale
Number of positions (face)Power: 3+PE, Signal: 5
Wire terminationcrimp connection
Body colorblack, similar to RAL 9011
Technical dataHead B
Installation sizePitch dimension 7.62 mm
Connector typeplug
Contact typefemale
Number of positions (face)4-pin
Wire terminationClamping yoke connection
Max. wire cross-sectionAWG24 ... AWG8 (0.2 mm² ... 10 mm²)
Body colorblack, similar to RAL 9011
Technical dataHead C
Installation sizePitch dimension 3.50 mm
Connector typeplug
Contact typefemale
Number of positions (face)5-pin
Wire terminationClamping yoke connection
Max. wire cross-sectionAWG28 ... AWG14 (0.2 mm² ... 1.5 mm²)
Body colorblack, similar to RAL 9011
Technical dataMeterware
Cross-section (power)1.00 mm² (approx. AWG18)
Cross-section (signal)AWG22 (approx. 0.34 mm²)
Usesuitable for torsion/robotic application
Material jacketTPU (thermoplastic polyurethane)
Outer cable diameter12.0 mm ± 0.2 mm (0.472" ± 0.0079")
Jacket colororange
A144.00 mm
A219.00 mm
B145.00 mm
B245.00 mm
C119.00 mm
C225.00 mm
Ordering informationLength
ZK4500-8062-xxxxxxxx = cable length in decimeters
xxxx = 0050example for 5 m length
sold by the meter, admissible total cable length see documentation of Servo Drive

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use