LossaFästStäng

KL2535 | Bus Terminal, 2-channel PWM output, 24 V DC, 1 A, current-controlled

KL2535 | Bus Terminal, 2-channel PWM output, 24 V DC, 1 A, current-controlled

KL2535 | Bus Terminal, 2-channel PWM output, 24 V DC, 1 A, current-controlled

Run LED
Enable A LED
Error A LED
Power LED
Enable B LED
Warning
Error B LED
Power contact
+24 V
Power contact 0 V
A1
B1
Sense A
Input 1
A2
B2
Sense B
Input 2
Top view 
Contact assembly 
KL2535 | Bus Terminal, 2-channel PWM output, 24 V DC, 1 A, current-controlled

KL2535 | Bus Terminal, 2-channel PWM output, 24 V DC, 1 A, current-controlled

The KL2535 output terminal controls an output current via pulse width control of the supply voltage. It is galvanically isolated from the K-bus. The current value (0 to ±1 A) is specified by the automation device via a 16 bit value. The output stage is protected against overload and short-circuit. The Bus Terminal contains two channels that indicate their signal state by means of light emitting diodes. The LEDs simplify local diagnosis by displaying typical load and wiring faults.

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use