KL6224 | Bus Terminal, 4-channel communication interface, IO-Link, master
9, 11, 13, 15
+24 V DC
0 V
KL6224 | Bus Terminal, 4-channel communication interface, IO-Link, master
From the IO-Link sensor into the cloud
The KL6224 IO-Link master terminal enables connection of up to four IO-Link devices, e.g. actuators, sensors or combinations of both. A point-to-point connection is used between the terminal and the device. IO-Link is designed as an intelligent link between the fieldbus level and the sensor, wherein parameterization information can be exchanged bidirectionally via the IO-Link connection. The parameterization of the IO-Link devices with service data can be done from TwinCAT via register communication or very conveniently via the integrated IO-Link configuration tool.
In the standard setting, the KL6224 functions as a 4-channel input terminal, 24 V DC, which communicates with connected IO-Link devices, parameterizes them and, if necessary, changes their operating mode.
Integration into the HD housing with 16 connection points enables each IO-Link device to be operated in 3-wire connection mode. The direct plug-in technique enables toolless construction.
Additional 24 V and 0 V connection points can be realized via the KL918x potential distributor terminal.
Product status:
regular delivery
Product information
| Technical data | KL6224 |
|---|---|
| Technology | IO-Link |
| Number of channels | 4 |
| IO-Link interfaces | 4 |
| Field voltage | 24 V DC via power contacts |
| Specification version | IO-Link V1.1 |
| Connection | 3-wire |
| Data transfer rates | 4.8 kbaud, 38.4 kbaud and 230.4 kbaud |
| Cable length | max. 20 m |
| Power supply | via K-bus and power contacts |
| Supply current for devices | 500 mA per device |
| Current consumption K-bus | typ. 85 mA |
| Current consumption power contacts | no data |
| Electrical isolation | 500 V (K-bus/signal voltage) |
| Power contacts | yes |
| Nominal voltage | 24 V DC (-15%/+20%) |
| Weight | approx. 60 g |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL |
| Housing data | HD housing |
|---|---|
| Design form | HD (High Density) housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | – |
| Wiring | solid conductors (s): direct plug-in technique; fine-stranded conductors (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Stripping length | 8…9 mm |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use