DetachFixClose

EL3174-0030 | EtherCAT Terminal, 4-channel analog input, -10/0…+10 V, -20/0/+4…+20 mA, 16 bit, with external calibration certificate

EL3174-0030 | EtherCAT Terminal, 4-channel analog input, -10/0…+10 V, -20/0/+4…+20 mA, 16 bit, with external calibration certificate

EL3174-0030 | EtherCAT Terminal, 4-channel analog input, -10/0…+10 V, -20/0/+4…+20 mA, 16 bit, with external calibration certificate

Run LED
Err LED
CH1...4
Power contact
+24 V
Power contact 0 V
Ch1 U+
Ch2 U+
Ch3 U+
Ch4 U+
+24 V
+24 V
+24 V
+24 V
Ch1 U-
Ch2 U-
Ch3 U-
Ch4 U-
Input Ch1
Input Ch2
Input Ch3
Input Ch4
Top view 
Contact assembly 
EL3174-0030 | EtherCAT Terminal, 4-channel analog input, -10/0…+10 V, -20/0/+4…+20 mA, 16 bit, with external calibration certificate

EL3174-0030 | EtherCAT Terminal, 4-channel analog input, -10/0…+10 V, -20/0/+4…+20 mA, 16 bit, with external calibration certificate

The EL3174-0030 analog input terminal has four individually parameterisable inputs. Signals in the range from -10/0 to +10 V or -20/0/+4 to +20 mA can be processed via each channel. Physically, the voltage and current signals should be connected to different terminal points. Each channel should then be set by the controller/TwinCAT to U or I mode via CoE. The voltage inputs operate differentially; the current inputs are single-ended. All inputs are digitised with a resolution of 16 bits and transmitted, electrically isolated, to the higher-level automation device. With a technical measuring range of ±107 % of the nominal range, the terminal also supports commissioning with sensor values in the limit range and diagnostics according to NAMUR NE43.

For the EL3174-0030, an individual calibration certificate is available, currently as a choice of DAkkS or IS0 17025-compliant certificate. The certificate is issued by an accredited service provider in collaboration with Beckhoff.

The desired calibration certificate can be downloaded from here using the respective serial number.

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use