Electrical data | |
---|---|
Rated voltage | 600 V |
Operating voltage | ≤ 125 V (peak value, not for high voltage purposes) |
Attenuation of shielding | ≥ 40 dB |
Insulation resistance | ≥ 500 MΩ/km |
Unbalanced capacitance to ground | 1600 pF/km |
Mutual capacitance | 52 nF/km (1 kHz) |
Characteristic impedance (Ethernet) | 100 Ω ±15 Ω (100 MHz) |
Loop resistance (Ethernet) | ≤ 115 Ω/km |
Differential impedance (Ethernet) | 250 Ω/km |
Unbalanced resistance (Ethernet) | 2 % |
Dielectric strength wire/wire (Ethernet) | 1000 V DC/700 V AC |
Dielectric strength wire/shield (Ethernet) | 1000 V DC/700 V AC |
Signal running time (Ethernet) | 5.3 ns/m |
Electrical parameters (Ethernet) | based on CAT 5 |
Test voltage | ≥ 2000 V |
Mechanical data | |
Cable structure (Ethernet) | star quad |
Conductor construction (Ethernet) | 7 x 0.25 mm |
Cross section (Ethernet) | 0.34 mm² (AWG 22) |
Min. bending radius, moved | 7.5 x outer cable diameter |
Min. bending radius, moved in drag chain | 15 x outer cable diameter |
Min. bending radius, fixed installation | 5 x outer cable diameter |
Weight | 61 kg/km (41.0 lb/1000 ft) |
Outer cable diameter | 6.5 mm ± 0.2 mm (0.2559" ± 0.0079") |
Conductor material (Ethernet) | copper, tinned |
Optical covering factor of shielding (Ethernet) | ≥ 85 % |
Use | drag-chain suitable |
Max. acceleration | 4 m/s² |
Max. speed | 4 m/s |
Max. number of cycles | 3 million |
Wall thickness of wire insulation (Ethernet) | 0.375 mm |
Jacket colour | green |
Material jacket | PUR (polyurethane) |
Wire colour code | yellow, orange, white, blue |
Wire insulation material | PP (polypropylene) |
Printing on the jacket | BECKHOFF ZB9020 Industrial Ethernet / EtherCAT Trailing Cable * CAT5PLUS * 22AWG (SHIELDED) (UL) E119100 CMX 75°C VERIFIED (UL) CAT 5E PATCH CABLE FRNC *"length in meters" |
Printing colour | black |
Environmental data | |
Operation temperature range, moved | -40…+70 °C, -40…+158 °F |
Operation temperature range, fixed installation | -20…+60 °C, -4…+140 °F |
UV resistance | yes |
Oil resistance | according to DIN EN 60811-404 (7x24 h/90 °C) |
Acid, lye and solvent resistance | depends on medium, concentration, temperature and duration |
LABS-free | yes |
Flame-retardant | yes |
CFC-free | yes |
Halogen-free | yes |
Silicone-free | yes |
Approvals | UL-Style AWM 20963 |
![]() |
![]() |
Attenuation | ||||||||
---|---|---|---|---|---|---|---|---|
Max. insertion loss | ||||||||
Frequency [MHz] | 1 | 4 | 10 | 16 | 20 | 31.25 | 62.5 | 100 |
[db/100 m] | 2.1 | 4.0 | 6.3 | 8.0 | 9.0 | 11.4 | 16.5 | 21.3 |
[db/100 ft] | 0.6 | 1.2 | 1.9 | 2.4 | 2.7 | 3.5 | 5 | 6.5 |
Min. near-end crosstalk attenuation | ||||||||
Frequency [MHz] | 1 | 4 | 10 | 16 | 20 | 31.25 | 62.5 | 100 |
[db/100 m] | 80 | 76.0 | 70.0 | 65.0 | 63.0 | 60.0 | 55.0 | 50.0 |
[db/100 ft] | 24.4 | 23.2 | 21.3 | 19.8 | 19.2 | 18.3 | 16.8 | 15.2 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
- The following length tolerances apply: 2-3 %
- Illustrations similar
Ordering information | Length |
---|---|
ZB9020 | sold by the metre |
ZB9020-R000 | 500 m |
![]() |
![]() |
Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.
© Beckhoff Automation GmbH & Co. KG 03/2019
The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract. |