ZK1093-9191-0xxx | Industrial-Ethernet/EtherCAT patch cable, CAT5, PUR, 2 x 4 x AWG26

RJ45, plug, straight, male, 8-pin – RJ45, plug, straight, male, 8-pin

Plugs

Electrical data Head A Head B
Rated voltage 160 V (according to IEC 61076-2-101) 160 V (according to IEC 61076-2-101)
Rated current 1 A at 50 °C 1 A at 50 °C
Shielding yes yes
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2) ≥ 10 GΩ (according to IEC 60512-2)
Mechanical data    
Installation size RJ45 RJ45
Connector type plug plug
Configuration straight straight
Contact type male male
Number of positions (face) 8-pin 8-pin
Mating cycles ≥ 750 ≥ 750
Body colour - -
Body material PUR PUR
Contact material CuZn CuZn
Contact plating Ni, Au gal. Ni, Au gal.
Environmental data    
UV resistance acc. to IEC 60068-2-5 acc. to IEC 60068-2-5
RoHS compliant yes yes
Oil resistance According to IEC 60811-2-1 respectively according to DIN VDE 0282 part 10 According to IEC 60811-2-1 respectively according to DIN VDE 0282 part 10
Ambient temperature, operation -40...+85 °C, -40...+185 °F -40...+85 °C, -40...+185 °F
Protection class IP 20 IP 20

Cable

Electrical data  
Insulation resistance min. 5000 MΩ/km bei 20 °C
Unbalanced capacitance to ground 1600 pF/km
Mutual capacitance 51 pF/m at 1 kHz
Characteristic impedance (Ethernet) 100 Ω ±15 Ω (100 MHz)
Loop resistance (Ethernet) 280 Ω/km
Unbalanced resistance (Ethernet) max. 5 % Ω at 20 °C
Dielectric strength wire/wire (Ethernet) 1000 V DC
Dielectric strength wire/shield (Ethernet) 1500 V DC
Signal running time (Ethernet) 5.08 ns/m
Electrical parameters (Ethernet) based on CAT 5
Test voltage 1000 V, 50 Hz, 1 min.
Mechanical data  
Cross section (Ethernet) 0.14 mm² (AWG26/7)
Min. bending radius, moved 10 x outer cable diameter
Min. bending radius, fixed installation 5 x outer cable diameter
Outer cable diameter 5.9 mm ± 0.2 mm (0.2323" ± 0.0079")
Conductor material (Ethernet) copper, tinned
Optical covering factor of shielding (Ethernet) 90 %
Use fixed installation
Jacket colour yellow
Material jacket PUR (polyurethane)
Wire colour code white/orange, orange, white/green, green, blue, white/blue, white/brown, brown
Wire insulation material PE (polyethylene)
Printing colour black
Environmental data  
Operation temperature range, fixed installation -40…+80 °C, -40…+176 °F
Oil resistance against mineral-oil and petrol
Acid, lye and solvent resistance depends on medium, concentration, temperature and duration
Flame-retardant UL94-V2, IEC 60332-1
Approvals E499669
Attenuation  
Max. insertion loss
Frequency [MHz] 1 4 10 16 20 31.25 62.5 100
[db/100 m] 2.4 4.9 7.8 9.8 11.1 14.0 20.4 22.4
[db/100 ft] 0.7 1.5 2.4 3 3.4 4.3 6.2 6.8
Min. near-end crosstalk attenuation
Frequency [MHz] 1 4 10 16 20 31.25 62.5 100
[db/100 m] 62.3 52.3 47.3 44.2 42.8 39.9 35.4 32.3
[db/100 ft] 19 15.9 14.4 13.5 13 12.2 10.8 9.8
Contact assembly  
Dimensions  
 
 
A1 37.00 mm
B1 37.00 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK1093-9191-0010 1.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 04/2018

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.