ZK2000-5152-0xxx | Sensor cable, PUR, 5 x 0.34 mm², drag-chain suitable

M12, plug, straight, male, 5-pin, A‑coded – M12, socket, straight, female, 5-pin, A‑coded


Electrical data Head A Head B
Rated voltage 60 V (according to IEC 61076-2-101) 60 V (according to IEC 61076-2-101)
Rated current 4 A at 40 °C (according to IEC 61076-2-101) 4 A at 40 °C (according to IEC 61076-2-101)
Shielding no no
Contact resistance < 10 mΩ < 10 mΩ
Insulation resistance ≥ 100 MΩ (according to IEC 60512) ≥ 100 MΩ (according to IEC 60512)
Mechanical data    
Installation size M12 M12
Connector type plug socket
Configuration straight straight
Contact type male female
Number of positions (face) 5-pin 5-pin
Coding A‑coded A‑coded
Recommended torque, nut 0.6 Nm 0.6 Nm
Mating cycles ≥ 100 (according to IEC 60512-9a) ≥ 100 (according to IEC 60512-9a)
Way of locking screw screw
Weight per piece 0.023 kg (0.0507 lb) 0.023 kg (0.0507 lb)
Body colour black black
Body material TPU, UL 94 HB TPU, UL 94 HB
Coupling nut material GD-Zn, Ni GD-Zn, Ni
Contact carrier colour red red
Contact carrier material PA, UL 94 V-0 PA, UL 94 V-0
Contact material CuZn, Ni b/Au 0.2 gal. CuZn, Ni b/Au 0.2 gal.
Environmental data    
Special features halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1

halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1
RoHS compliant yes yes
Ambient temperature (operation) -30...+85 °C, -22...+185 °F -30...+85 °C, -22...+185 °F
Protection class IP 65/67 in screwed condition (according to IEC 60529) IP 65/67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)


Electrical data  
Rated voltage 60 V (according to IEC 61076-2-104)
Insulation resistance ≥ 1 GΩ * km
Wire resistance (signal/24V) ≤ 58.0 Ω/km (20 °C)
Test voltage ≥ 3000 V
Mechanical data  
Conductor construction (signal/24V) 42 x 0.10 mm
Cross section (signal) 5 x 0.34 mm² (AWG22)
Min. bending radius, moved 10 x outer cable diameter
Min. bending radius, fixed installation 5 x outer cable diameter
Weight 37 kg/km (24.86 lb/1000 ft)
Outer cable diameter 5.1 mm ± 0.15 mm (0.200787" ± 0.0059")
Use drag-chain suitable
Max. acceleration 10 m/s²
Max. speed 3 m/s
Max. travel distance 10 m
Max. number of cycles 4 million
Wall thickness of wire insulation (signal/24V) ≥ 0.21 mm
Jacket colour black
Material jacket PUR (polyurethane)
Wire colour code brown, white, blue, black, grey
Printing colour white
Environmental data  
Operation temperature range, moved -25…+80 °C, -13…+176 °F
Operation temperature range, fixed installation -40…+80 °C, -40…+176 °F
Flame-retardant acc. to DIN EN 60332-2-2
Halogen-free DIN VDE 0472 part 815
Approvals UL
Contact assembly  
A1 49.00 mm
A2 20.00 mm
B1 44.00 mm
B2 20.00 mm


- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2000-5152-0006 0.60 m
ZK2000-5152-0010 1.00 m
ZK2000-5152-0015 1.50 m
ZK2000-5152-0016 1.60 m
ZK2000-5152-0020 2.00 m
ZK2000-5152-0025 2.50 m
ZK2000-5152-0028 2.80 m
ZK2000-5152-0030 3.00 m
ZK2000-5152-0035 3.50 m
ZK2000-5152-0040 4.00 m
ZK2000-5152-0045 4.50 m
ZK2000-5152-0050 5.00 m
ZK2000-5100-0060 6.00 m
ZK2000-5152-0065 6.50 m
ZK2000-5152-0067 6.70 m
ZK2000-5152-0100 10.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.


© Beckhoff Automation GmbH & Co. KG 02/2020


The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.