ZK2000-6500-0xxx | Sensor cable, PUR, 4 x 0.25 mm², drag-chain suitable

M12, plug, straight, male, 4-pin, A‑coded – open end, 4-wire

Plugs

Electrical data Head A Head B
Rated voltage x-pin 4-pin, 250 V (IEC 61076-2-101) -
Rated current (signal/24V) 4 A at 40 °C (according to IEC 61076-2-101) -
Shielding no -
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2) -
Mechanical data    
Installation size M12 open end
Connector type plug -
Configuration straight -
Contact type male -
Number of positions (face) 4-pin 4-wire
Coding A‑coded -
Wire termination crimp connection -
Recommended torque, nut 0.6 Nm -
Mating cycles ≤ 100 (according to IEC 60512-9a) -
Way of locking screw -
Body colour black -
Body material TPU, self-extinguishing -
Coupling nut material CuZn, Ni -
Seal FPM -
Contact carrier colour red -
Contact carrier material TPU GF, UL 94 -
Contact material CuZn -
Contact plating Ni, Au gal. -
Environmental data    
Special features halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1 -
RoHS compliant yes -
Ambient temperature, operation -25...+80 °C, -13...+176 °F -
Protection class IP 67 in screwed condition (according to IEC 60529) -
Pollution level 3/2 (according to IEC 60664-1) -

Cable

Electrical data  
Rated voltage ≤ 300 V
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2)
Wire resistance (signal/24V) ≤ 58.0 Ω/km (20 °C)
Test voltage ≥ 3000 V
Mechanical data  
Conductor construction (signal/24V) 32 x 0.10 mm
Cross section (signal) 4 x 0.25 mm²
Min. bending radius, moved 6 x outer cable diameter
Weight 28 kg/km (18.8 lb/1000 ft)
Outer cable diameter 4.4 mm ± 0.15 mm (0.173" ± 0.0059")
Use drag-chain suitable
Max. acceleration 10 m/s²
Max. speed 5 m/s
Max. number of cycles 10 million at max. 20 m travel distance, 2 million at max. 100 m travel distance
Jacket colour black
Material jacket PUR (polyurethane)
Wire colour code white, blue, black, brown
Wire insulation material PP (polypropylene)
Printing colour white
Environmental data  
Operation temperature range, moved -25…+80 °C, -13…+176 °F
Flame-retardant acc. to cULus 20549
Halogen-free DIN VDE 0472 part 815
Contact assembly  
Dimensions  
A1 50.00 mm
A2 19.30 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2000-6500-0005 2 x 0.50 m
ZK2000-6500-0010 2 x 1.00 m
ZK2000-6500-0020 2 x 2.00 m
ZK2000-6500-0050 2 x 5.00 m
ZK2000-6500-0100 2 x 10.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 07/2017

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.