ZK2000-7171-0xxx | Sensor cable, PUR, 4 x 0.34 mm², drag chain suitable

M12, plug, straight, male, 5-pin, A‑coded – M12, plug, straight, male, 5-pin, A‑coded

Plugs

Electrical data Head A Head B
Rated voltage 60 V (according to IEC 61076-2-101) 60 V (according to IEC 61076-2-101)
Rated current 4 A at 40 °C (according to IEC 61076-2-101) 4 A at 40 °C (according to IEC 61076-2-101)
Shielding no no
Contact resistance < 10 mΩ < 10 mΩ
Insulation resistance ≥ 100 MΩ (according to IEC 60512) ≥ 100 MΩ (according to IEC 60512)
Mechanical data    
Installation size M12 M12
Connector type plug plug
Configuration straight straight
Contact type male male
Number of positions (face) 5-pin 5-pin
Coding A‑coded A‑coded
Recommended torque, nut 0.6 Nm 0.6 Nm
Mating cycles ≥ 100 (according to IEC 60512-9a) ≥ 100 (according to IEC 60512-9a)
Way of locking screw screw
Weight per piece 0.023 kg (0.0507 lb) 0.023 kg (0.0507 lb)
Body colour black black
Body material PA6 GF, UL 94 HB PA6 GF, UL 94 HB
Coupling nut material GD-Zn, Ni GD-Zn, Ni
Seal elastomers elastomers
O-ring FKM/NBR FKM/NBR
Contact carrier colour black black
Contact carrier material PA 6, UL 94 V-0 PA 6, UL 94 V-0
Contact material CuZn, Ni b/Au 0.2 gal. CuZn, Ni b/Au 0.2 gal.
Contact plating Au Au
Environmental data    
RoHS compliant yes yes
Ambient temperature, operation -30...+85 °C, -22...+185 °F -30...+85 °C, -22...+185 °F
Protection class IP 67 in screwed condition (according to IEC 60529) IP 67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)

Cable

Electrical data  
Rated voltage ≤ 300 V
Insulation resistance 10 MΩ * km
Wire resistance (signal/24V) ≤ 58.0 Ω/km (20 °C)
Test voltage ≥ 3000 V
Mechanical data  
Conductor construction (signal/24V) 42 x 0.10 mm
Cross section (signal) 4 x 0.34 mm² and shield on pin 5
Min. bending radius, moved 10 x outer cable diameter
Min. bending radius, fixed installation 5 x outer cable diameter
Weight 45 kg/km (30.2 lb/1000 ft)
Outer cable diameter 5.4 mm ± 0.2 mm (0.213" ±0.0079")
Optical covering factor of shielding ≥ 85%
Max. acceleration 5 m/s²
Max. speed 1.6 m/s
Max. travel distance 5 m (horizontal with 5 m/s²),
2 m (vertical with 5 m/s²)
Max. number of cycles 2 million
Jacket colour black
Material jacket PUR (polyurethane)
Wire colour code brown, white, blue, black
Wire insulation material PP (polypropylene)
Printing colour white
Environmental data  
Operation temperature range, moved -30…+80 °C, -22…+176 °F
Flame-retardant 758/1581
Halogen-free DIN VDE 0472 part 815
Contact assembly  
Dimensions  
 
 
A1 49.00 mm
A2 20.00 mm
B1 49.00 mm
B2 20.00 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2000-7171-0006 0.60 m
ZK2000-7171-0010 1.00 m
ZK2000-7171-0020 2.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 11/2018

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.