ZK2002-6200-0xxx | Sensor cable with LEDs, PUR, 4 x 0.34 mm², drag-chain suitable

M12, socket with LEDs, straight, female, 4-pin, A‑coded – open end, 4-wire

Plugs

Electrical data Head A Head B
Rated voltage 250 V (according to IEC 61076-2-101) -
Rated current 5 A at 40 °C -
Shielding no -
Contact resistance < 10 mΩ -
Insulation resistance ≥ 100 MΩ (according to IEC 60512) -
Mechanical data    
Installation size M12 open end
Connector type socket with LEDs -
Configuration straight -
Contact type female -
Number of positions (face) 4-pin 4-wire
Coding A‑coded -
Recommended torque, nut 0.6 Nm -
Mating cycles ≥ 100 (according to IEC 60512-9a) -
Way of locking screw -
Body colour transparent -
Body material PA6 GF, UL 94 -
Coupling nut material GD-Zn, Ni -
O-ring FKM/NBR -
Contact carrier colour black -
Contact carrier material PA 6, UL 94 V-0 -
Contact material CuZn -
Contact plating Ni, Au gal. -
Environmental data    
RoHS compliant yes -
Ambient temperature, operation -30...+85 °C, -22...+185 °F -
Protection class IP 67 in screwed condition (according to IEC 60529) -
Pollution level 3/2 (according to IEC 60664-1) -

Cable

Electrical data  
Rated voltage ≤ 300 V
Insulation resistance ≥ 10 GΩ * km
Wire resistance (signal/24V) ≤ 58.0 Ω/km (20 °C)
Test voltage ≥ 3000 V
Mechanical data  
Conductor construction (power) 42 x 0.10 mm
Cross section (power) 4 x 0.34 mm² (AWG 22)
Min. bending radius, moved 6 x outer cable diameter
Weight 31 kg/km (20.8 lb/1000 ft)
Outer cable diameter 4.7 mm ± 0.15 mm (0.185" ± 0.0059")
Use drag-chain suitable
Max. acceleration 10 m/s²
Max. speed 5 m/s
Max. number of cycles 10 million at max. 20 m travel distance, 2 million at max. 100 m travel distance
Wall thickness of wire insulation (power) ≥ 0.21 mm
Jacket colour black
Material jacket PUR (polyurethane)
Wire colour code white, blue, black, brown
Wire insulation material PP (polypropylene)
Printing colour white
Environmental data  
Operation temperature range, moved -25…+80 °C, -13…+176 °F
Flame-retardant acc. to DIN EN 60332-2-2
Halogen-free DIN VDE 0472 part 815
Contact assembly  
Dimensions  
 
 
A1 57.00 mm
A2 20.00 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2002-6200-0010 1.00 m
ZK2002-6200-0030 3.00 m
ZK2002-6200-0050 5.00 m
ZK2002-6200-0100 10.00 m
ZK2002-6200-0150 15.00 m
ZK2002-6200-0200 20.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 01/2019

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.