ZK2020-3200-3xxx | Power cable, PVC, 4 x 0.34 mm², fixed installation

M8, socket, straight, female, 4-pin, A‑coded – open end, 4-wire

Plugs

Electrical data Head A Head B
Rated voltage x-pin 4-pin, 30 V (according to IEC 61076-2-101) -
Rated current (signal/24V) 4 A at 40 °C (acc.to IEC 61076-2-104) -
Shielding no -
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2) -
Mechanical data    
Installation size M8 open end
Connector type socket -
Configuration straight -
Contact type female -
Number of positions (face) 4-pin 4-wire
Coding A‑coded -
Recommended torque, nut 0.4 Nm -
Mating cycles ≥ 100 (according to IEC 60512-9a) -
Way of locking screw -
Weight per piece 0.028 kg (0.0617 lb) -
Body colour black -
Body material TPU, UL94 -
Coupling nut material CuZn, Ni -
Seal FPM -
Contact carrier colour red -
Contact carrier material TPU GF, UL 94 -
Contact material CuZn -
Contact plating Ni, Au gal. -
Environmental data    
Special features halogen-free, flame-resistant as per IEC 60332-1-2, oil-resistant as per DIN EN 60811-2-1 -
RoHS compliant yes -
Ambient temperature, operation -30...+80 °C, -22...+176 °F -
Protection class IP 67 in screwed condition (according to IEC 60529) -
Pollution level 3/2 (according to IEC 60664-1) -

Cable

Electrical data  
Rated voltage ≤ 300 V
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2)
Wire resistance (power) ≤ 58 Ω/km
Test voltage ≥ 3000 V
Mechanical data  
Conductor construction (power) 42 x 0.10 mm
Cross section (power) 4 x 0.34 mm² (AWG 22)
Min. bending radius, fixed installation 10 x outer cable diameter
Weight 31 kg/km (20.8 lb/1000 ft)
Outer cable diameter 4.70 ±0.15 mm
Use fixed installation
Wall thickness of wire insulation (power) ≥ 0.21 mm
Jacket colour grey
Material jacket PVC (polyvinyl chloride)
Wire colour code white, blue, black, brown
Wire insulation material PVC (polyvinyl chloride)
Printing colour white
Environmental data  
Operation temperature range, fixed installation -25…+80 °C, -13…+176 °F
Flame-retardant acc. to DIN EN 60332-2-2
Contact assembly  
Dimensions  
 
 
A1 33.00 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK2020-3200-3030 3.00 m
ZK2020-3200-3050 5.00 m
ZK2020-3200-3100 10.00 m
ZK2020-3200-3160 16.00 m
ZK2020-3200-3250 25.00 m
ZK2020-3200-3300 30.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 07/2018

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.