ZS7002-1002 | EtherCAT P contact carrier, M8

M8, EtherCAT P contact carrier, angled, female, 4-pin, EtherCAT-P-coded

Electrical data  
Rated voltage 30 V (according to IEC 61076-2-104)
Rated current (Ethernet) 3 A at 40 °C according to IEC 61076-2-104
Shielding yes
Insulation resistance ≥ 100 MΩ (according to IEC 60512)
Mechanical data  
Installation size M8
Connector type EtherCAT P contact carrier
Configuration angled
Contact type female
Number of positions (face) 4-pin
Coding EtherCAT-P-coded
Wire termination solder connection
Mating cycles ≥ 100
Seal NBR
Contact carrier colour red
Contact carrier material PA 6 GF, UL 94 V-0
Contact material CuZn
Contact plating Ni, Au gal.
Environmental data  
UV resistance yes
RoHS compliant yes
Ambient temperature, operation -40...+85 °C, -40...+185 °F
Protection class IP 67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1)
Dimensions  

Notes

- Illustrations similar

Ordering information  
ZS7002-1002 M8 contact carrier, angled, EtherCAT-P-coded for ZS7002-0005 and ZS7002-0006

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 12/2017

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.