2-port EtherCAT P junction with feed-in EK1322
Status LEDs
EtherCAT P
junction 1
EtherCAT P
junction 2
Top view

EK1322 | 2-port EtherCAT P junction with feed-in

The 2-port EK1322 EtherCAT P junction enables configuration of EtherCAT P star topologies. The ports can be used to connect individual EtherCAT P devices or whole EtherCAT P strands. The EK1322 can be installed at any point in an EtherCAT strand between the EtherCAT Terminals (ELxxxx). The front terminal points are used for the system and sensor supply US and the peripheral voltage for actuators UP for the EtherCAT P outputs. In addition to the Run LED and the link and activity status of the respective port, two status LEDs indicate the state of the US and UP voltages, as well as overload and short-circuit events.

Technical data EK1322
Task within EtherCAT system coupling of EtherCAT P junctions
Data transfer medium EtherCAT P cable, shielded, to 100BASE-TX EtherCAT P networks
Bus interface 2 x M8 socket, shielded, screw type, P-coded
Power supply external feed-in: 24 V DC for US and UP
Total current max. 3 A per US and UP
Current consumption from US typ. 3 mA
Current consumption from UP typ. 3 mA
Current rating per port max. 3 A per US and UP
Current consumption E-bus 200 mA
Operating/storage temperature 0…+55 °C/-25…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals/markings CE, UL
Cordsets cordsets and connectors
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
EtherCAT For further EtherCAT products please see the system overview.