2-channel digital input terminal 120 V AC/DC EL1712
Signal LED 2
Signal LED 1 
Power contact
120 V
Power contact 0 V
Power contact PE
Input 1
Input 2
120 V
Top view 
Contact assembly 

EL1712 | 2-channel digital input terminal 120 V AC/DC

The EL1712 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. It is possible to connect 120 V AC/DC sensors directly. The EtherCAT Terminal contains two channels that indicate their signal state by means of light emitting diodes.

Technical data EL1712 | ES1712
Connection technology 4-wire
Number of inputs 2
Nominal voltage 120 V AC/DC
“0” signal voltage 0…40 V
“1” signal voltage 80…140 V
Input current > 3 mA, typ. 6 mA
Input filter typ. 10 ms
Distributed clocks
Switching times 10 ms
Current consumption power contacts
Current consumption E-bus typ. 110 mA
Electrical isolation 500 V (E-bus/mains voltage); 3750 V AC, 1 min.
Configuration no address or configuration setting
Special features also suitable for 120 V DC
Weight approx. 60 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Product announcement
estimated market release on request