2-channel digital output terminal 24 V DC, T<span class="EFF_MAX_subscript">ON</span>/T<span class="EFF_MAX_subscript">OFF</span> 1 µs, push-pull outputs, tri-state EL2202
High impedance
Signal LED 2
High impedance
Signal LED 1 
Power contact
+24 V
Power contact 0 V
Power contact PE
Output 1
+24 V
0 V
Top view 
Contact assembly 
XFC – eXtreme Fast Control
extended shock and vibration range

EL2202 | 2-channel digital output terminal 24 V DC, TON/TOFF 1 µs, push-pull outputs, tri-state

The EL2202 digital output terminal connects the binary control signals from the automation unit on to the actuators at the process level with electrical isolation. This terminal benefits from very small output delay and is therefore suitable for signals requiring particularly fast output. The EtherCAT Terminal supports distributed clocks, i.e. output data can be monitored synchronously with other data from terminals with distributed clock support, if the user switches to terminal version EL2202-0100 (see documentation). The DC accuracy across the system is << 1 µs. The EtherCAT Terminal has a push-pull output that enables the output to be connected actively to 24 V, 0 V or high-resistance. The EL2202 contains two channels, whose signal state per channel is indicated via LEDs.

Technical data EL2202 | ES2202
Connection technology 4-wire
Number of outputs 2
Rated load voltage 24 V DC (-15 %/+20 %)
Load type ohmic, inductive, lamp load
Distributed clocks – (EL2202-0100 yes)
Distributed clock precision << 1 µs
Max. output current 0.5 A (short-circuit-proof in push operation) per channel
Short circuit current typ. < 1.5 A
Reverse voltage protection yes
Breaking energy < 150 mJ/channel
Switching times typ. TON: < 1 µs, typ. TOFF: < 1 µs
Output stage push-pull, high-ohmic
Current consumption E-bus typ. 130 mA
Electrical isolation 500 V (E-bus/field potential)
Current consumption power contacts typ. 30 mA + load
Bit width in the process image 2 outputs, 2 bit enable tri-state
Configuration no address or configuration setting
Special features can be converted to DC version EL2202-0100, outputs connectable in high-resistance mode
Weight approx. 60 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL, Ex
Special terminals
EL2202-0100 preset to DC
Further information  
XFC eXtreme Fast Control Technology