PROFINET RT controller/device terminal EL6631
Status LEDs
Top view

EL6631 | PROFINET RT controller/device terminal

The EL6631-0010 PROFINET RT device (slave) terminal enables simple exchange of data between EtherCAT and PROFINET RT. It is a device in the EtherCAT strand, which can consist of up to 65,535 devices. The EL6631-0010 has a 3-port switch. Two ports are fed to the outside on RJ45 sockets. This allows the I/O stations to be structured as a line topology, as a result of which the wiring is simplified. The maximum distance between two devices is 100 m.

Protocols such as LLDP or SNMP can be used for network diagnosis.

Technical data EL6631 EL6631-0010
Technology PROFINET RT
Number of ports/channels 2 (switched)
Ethernet interface 100BASE-TX Ethernet with 2 x RJ45
Fieldbus PROFINET RT controller PROFINET RT device
Cable length up to 100 m twisted pair
Hardware diagnosis status LEDs
Power supply via the E-bus
Electrical isolation 500 V (E-bus/Ethernet)
Protocol RT
Configuration via EtherCAT master
Current consumption E-bus typ. 400 mA
Special features LLDP, SNMP,
Conformance Class B,
max. 15 RT devices,
min. 1 ms RT cycle
Weight approx. 75 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/see documentation
Approvals CE, UL, Ex
PROFINET For further PROFINET products please see the system overview.