EtherCAT bridge terminal EL6695
Status LEDs
24 V
Top view

EL6695 | EtherCAT bridge terminal

The EL6695 EtherCAT bridge terminal enables real-time data exchange between EtherCAT Terminal strands with different masters. Asynchronous communication via AoE, FoE, EoE, NPI, etc. is also supported. Synchronisation of distributed clocks is possible in both directions. The EL6695 differs from the EL6692 (which will continue to be available) in terms of a flexible CoE configuration, a device emulation option and a significant increase in data throughput. A convenient configuration interface is available in the TwinCAT System Manager, as with the EL6692. The power supply for the secondary side (RJ45) is via an external connection, the primary side is supplied via the E-bus. The bridge terminal can also be used for integrating a subordinate PC system as an EtherCAT slave.

Technical data EL6695
Technology primary side: E-bus (terminal strand), secondary side: 2 x 100 Mbit/s Ethernet, RJ45, In/Out
Ports primary: E-bus, secondary: 2 x RJ45 EtherCAT input/output
Function EtherCAT distributed clock synchronisation, data exchange
Cable length 100 m 100BASE-TX, secondary port
Hardware diagnosis status LEDs
Power supply primary: via the E-bus, secondary: via connector, 24 V
Distributed clocks yes
Electrical isolation 500 V (E-bus/secondary side)
Current consumption primary: E-bus 400 mA; secondary: 70 mA/24 V
Bit width in the process image max. 3 kbyte per direction (dependent on the EtherCAT master, TwinCAT currently max. 1400 byte)
Special features usable in TwinCAT as a reference clock, synchronous data exchange, flexible PDO mapping, supports AoE, EoE, FoE, VoE
Weight approx. 75 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE, UL
Related products  
EL6692 EtherCAT bridge terminal