Shield terminal EL9195
Power contact
Power contact
Power contact
Power contact
Top view 
Contact assembly 
extended shock and vibration range 25g

EL9195 | Shield terminal

The EL9195 EtherCAT Terminal allows the supply voltage to be accessed a number of times via spring force terminals. It makes it unnecessary to use additional terminal blocks on the terminal strip. The EL9195 can be used for the connection of screens. The EL9195 connects the spring force contacts directly to the DIN rail, and can optimally ground incoming electromagnetic radiation. The two power contacts are looped through by the EL9195, allowing two wires to be connected to each power contact.

Technical data EL9195 | ES9195
Technology shield terminal
Current load ≤ 10 A
Power LED
Defect LED
Renewed infeed
Current consumption E-bus
Nominal voltage arbitrary up to 230 V AC/DC
Integrated fine-wire fuse
Electrical isolation 500 V (E-bus/field potential)
Diagnostics in the process image
Reported to E-bus
PE contact
Shield connection 2 x
Connection facility to additional power contact 2
Bit width in the process image 0
Electrical connection to DIN rail yes
Housing width 12 mm
Side by side mounting on
EtherCAT Terminals with
power contact
only 2 power contacts
Side by side mounting on
EtherCAT Terminals without
power contact
Special features dissipation of EMC interference
Weight approx. 50 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Pluggable wiring for all ESxxxx terminals
Approvals/markings CE, UL, ATEX
Ex marking II 3 G Ex nA IIC T4 Gc