2-channel analog input terminal ±30 V…±20 mV, 24 bit, 20 ksps ELM3002-0000
XFC – eXtreme Fast Control
extended temperature range
voltage measurement

ELM3002-0000 | 2-channel analog input terminal ±30 V…±20 mV, 24 bit, 20 ksps

The ELM300x EtherCAT Terminals are designed for flexible voltage measurement from 20 mV to 30 V in eleven measuring ranges. The measuring range is selected in the CoE, as are the other setting options such as the filter parameters. Irrespective of the signal configuration, all ELM modules have the same technological properties. The ELM300x modules for voltage measurement offer a maximum sampling rate of 10,000 or 20,000 samples per second. The 2-pin plug (push-in) can be removed for maintenance purposes without releasing the individual wires.

Available as variant with factory calibration certificate or ISO 17025-/DAkkS-compliant certificate including Beckhoff recalibration service.

Features ELM300x
Voltage measurement ±30/10/5/2.5/1.25 V, ±640/320/160/80/40/20 mV, 0…5/10 V
Technical data ELM3002-0000
Number of channels 2
Technology voltage measurement
Signal type differential
Connection technology 2-wire
Connection type push-in, service plug 2-pin
Max. sampling rate max. 50 µs/20 ksps (per channel, simultaneously)
Oversampling factor n = 1…100 selectable (max. 20 ksamples/s)
Internal resistance > 500 kΩ (30 V); > 4 MΩ (others)
Measuring error up to typ. < ±100 ppm/±0.01 % (30 V…80 mV) relative to the respective full scale value
Temperature coefficient typ. < 10 ppm/K
Functional diagnostics yes
Connection diagnostics broken wire/short circuit
Distributed clocks yes, accuracy << 1 µs
Resolution 24 bit (incl. sign)
Current consumption power contacts
Current consumption E-bus typ. 330 mA
Weight approx. 350 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Thermal dissipation typ. 3 W
Special features ExtendedRange 107 %, free numeric filter, TrueRMS, integrator/differentiator, non-linear scaling, PeakHold
Approvals/markings CE, UL
ZS9100-0002 shield connection for ELM series, shield diameter 7…16 mm
ZS9100-0003 shielding hood for EtherCAT measurement modules with push-in connector (ELM3xxx-0000), to provide shielding against external interference and temperature stabilisation at the measuring points when measuring temperature, black, scope of supply: shielding hood, screws, tie wraps