2-channel IEPE analysis, 24 bit, 50 ksps ELM3602-0000
XFC – eXtreme Fast Control

ELM3602-0000 | 2-channel IEPE analysis, 24 bit, 50 ksps

The ELM360x EtherCAT Terminals are designed for the evaluation of IEPE sensors (Integrated Electronics Piezo-Electric), which are mainly used for vibration diagnostics and acoustics. The constant current feed can be set to 0/2/4 mA. The input characteristics are also flexibly adjustable from DC to 10 Hz in the CoE. The ELM360x basically measures voltages AC/DC and in addition, the internal scaler function can be used if, for example, an output in acceleration [m/s²] is desired. In voltage measurement mode 12 different measurement ranges from ±20 mV to ±10 V and 0 to 20 V are adjustable.

Irrespective of the signal configuration, all ELM modules have the same technological properties. The ELM360x modules for IEPE evaluation offer a maximum sampling rate of 20,000 or 50,000 samples per second. IEPE sensors are often connected via coaxial cables, therefore the ELM360x-0002 feature a BNC connector. The new 2-pin version with push-in (ELM360x-0000) on the other hand is ideal for industrial use where a plug is unplugged less frequently for maintenance purposes and fast wiring is much more important.

Available on request as variant with factory calibration certificate or ISO 17025-/DAkkS-compliant certificate including Beckhoff recalibration service.

Features ELM360x
Voltage measurement ±10/5/2.5/1.25 V, ±640/320/160/80/40/20 mV, 0…10/20 V (application notes for ±10 V measurement see documentation)
IEPE measurement current feed 2/4 mA, can be deactivated, acquisition of the modulated AC voltage, AC/DC coupling (parameterisable high-pass)
Technical data ELM3602-0000
Number of channels 2
Technology IEPE, voltage measurement
Signal type single-ended
Connection technology 2-wire
Connection type push-in, service plug 2-pin
Max. sampling rate max. 20 µs/50 ksps (per channel, simultaneously)
Oversampling factor n = 1…100 selectable
Internal resistance > 2 MΩ
Measuring error up to typ. < ±100 ppm/±0.01 % relative to the respective full scale value (DC) @ 23 °C
Temperature coefficient typ. < 10 ppm/K
Functional diagnostics yes
Connection diagnostics broken wire/short circuit
Distributed clocks yes, accuracy << 1 µs
Resolution 24 bit (incl. sign)
Current consumption power contacts
Current consumption E-bus typ. 460 mA
Weight approx. 350 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Thermal dissipation typ. 3 W
Special features ExtendedRange 107 %, free numeric filter, TrueRMS, integrator/differentiator, non-linear scaling, PeakHold
Approvals/markings CE, UL
ZS9100-0002 shield connection for ELM series, shield diameter 7…16 mm
ZS9100-0003 shielding hood for EtherCAT measurement modules with push-in connector (ELM3xxx-0000), to provide shielding against external interference and temperature stabilisation at the measuring points when measuring temperature, black, scope of supply: shielding hood, screws, tie wraps