EP1111 | EtherCAT Box with ID switch
1 | Tx+
2 | Rx+
3 | Rx-
4 | Tx-
1 | + 24 V DC Us
2 | + 24 V DC UP
3 | GND
4 | GND
ID switch
Power supply
status display:
Box supply (US)
Auxiliary voltage (UP)
Power supply feed
Power supply down-
stream connection
signal input
signal output
extended temperature range

EP1111-0000 | EtherCAT Box with ID switch

The EP1111 has three decimal ID switches for assigning an ID to a group of EtherCAT components. This group can be present in any position in the EtherCAT network, as a result of which variable topologies can be realised in a simple manner.

The EtherCAT connection is established via shielded M8 screw connectors with direct display of link and activity status. The Run LED indicates the status of the EP1111.

Technical data EP1111-0000
Task within EtherCAT system identification of any EtherCAT group in the EtherCAT network
Number of configurable IDs 999
Data transfer medium EtherCAT cable
Distance between stations 100 m (100BASE-TX)
Protocol EtherCAT
Data transfer rates 100 Mbit/s
Nominal voltage 24 V DC (-15 %/+20 %)
Distributed clocks
Configuration not required
Bus interface 2 x M8 socket, shielded, screw type
Power supply 24 V DC
Sensor supply
Weight approx. 165 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals/markings CE, UL
ZK1090-3xxx-xxxx Cables for EtherCAT signal in- and -output