TF5000

TF5000 | TC3 NC PTP 10 Axes

TC3 NC PTP 10 Axes implements Motion Control for point-to-point movements in software. The axes are represented by axis objects and provide a cyclic interface, e.g. for the PLC. This axis object is then linked to a corresponding physical axis. In this way, the most diverse axis types with the most diverse fieldbus interfaces can be connected abstractly with the axis objects, which always offer an identical configuration interface. The control of the axes can be configured in various conformations (position or velocity interface) and various controllers. The axes are configured in TwinCAT Engineering.

Technical data TF5000
Required TC1200
Target system Windows 7/8/10, Windows CE
Ordering information
TF5000-0v30 TC3 NC PTP 10 Axes, platform 30 (Economy Plus)
TF5000-0v40 TC3 NC PTP 10 Axes, platform 40 (Performance)
TF5000-0v50 TC3 NC PTP 10 Axes, platform 50 (Performance Plus)
TF5000-0v60 TC3 NC PTP 10 Axes, platform 60 (Mid Performance)
TF5000-0v70 TC3 NC PTP 10 Axes, platform 70 (High Performance)
TF5000-0v80 TC3 NC PTP 10 Axes, platform 80 (Very High Performance)
TF5000-0v81 TC3 NC PTP 10 Axes, platform 81 (Many-core 5…8 Cores)
TF5000-0v82 TC3 NC PTP 10 Axes, platform 82 (Many-core 9…16 Cores)
TF5000-0v83 TC3 NC PTP 10 Axes, platform 83 (Many-core 17…32 Cores)
TF5000-0v84 TC3 NC PTP 10 Axes, platform 84 (Many-core 33…64 Cores)
TF5000-0v90 TC3 NC PTP 10 Axes, platform 90 (Other)
TF5000-0v91 TC3 NC PTP 10 Axes, platform 91 (Other 5…8 Cores)
TF5000-0v92 TC3 NC PTP 10 Axes, platform 92 (Other 9…16 Cores)
TF5000-0v93 TC3 NC PTP 10 Axes, platform 93 (Other 17…32 Cores)
TF5000-0v94 TC3 NC PTP 10 Axes, platform 94 (Other 33…64 Cores)
Related products  
TF5010 TC3 NC PTP Axes Pack 25
TF5020 TC3 NC PTP Axes Pack unlimited